direwulf23
Full Access Member
So, I've been struggling off and on with a code 23 error. I have had the voltages set at 1.1 and 4.2 and installed a new FIPL/ TPS. Code would still come back randomly.
I've been reading the other threads and achieves to see what I was missing. I pulled out my old FIPL and checked where the tongue from the throttle contacted and pulled the new one of to check that it was the same. They were, but then something happened. One of the clips on the side of the socket fell off. So, then, that was broken and obviously the connection was being lost. So, I grabbed some electrical tape and taped it down tight, for now.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
I've been reading the other threads and achieves to see what I was missing. I pulled out my old FIPL and checked where the tongue from the throttle contacted and pulled the new one of to check that it was the same. They were, but then something happened. One of the clips on the side of the socket fell off. So, then, that was broken and obviously the connection was being lost. So, I grabbed some electrical tape and taped it down tight, for now.
Sent from my SAMSUNG-SGH-I537 using Tapatalk