IDIoit
MachinistFabricator
found a hole in the bottom of the hull, currently have the engine out to fix it....
tick tick tick!!! ******
- Thread starter IDIoit
- Start date
****
It never ends bud.
It never ends bud.
IDIoit
MachinistFabricator
no sir, and now im sippin on whiskey, and no motivation to touch the truck tonight.
tomorrow is another day.
tomorrow is another day.
crash-harris
Breaker! Breaker!
Subbing for more mystery tick info...
SebastIDIan
Full Access Member
Detonation? Try 93 octane? Have you tried turning it off and back on a few times yet??
FarmerFrank
Full Access Member
Unscrew the oil filter, empty and fill with Lucas.
Had an engine that had a wrist pin tap. After a Lucas treatment it was good for about 800 miles.
I put 10k on that engine before I sold the truck, drove 110 miles a day and every tap sounded like it was about to grenade.
Sent from my iPhone using Tapatalk
Had an engine that had a wrist pin tap. After a Lucas treatment it was good for about 800 miles.
I put 10k on that engine before I sold the truck, drove 110 miles a day and every tap sounded like it was about to grenade.
Sent from my iPhone using Tapatalk
IDIoit
MachinistFabricator
Well. I found the source.
Got up early.
Did a leak down.
Pop tested all the sticks.
Everything was fine
New o rings
New return hoses.
Changed the oil
Fired her up and she quieted down.
Threw it a few revs, and she started to stutter a bit.
Ran it for a bit
Smoke cleared up.shut it down to do a few more things. And a rush of coolant came from under the truck.
So, to everyone that mentioned MMO,
Do you think it’ll help?? Lol
Block #2. Destroyed!
Got up early.
Did a leak down.
Pop tested all the sticks.
Everything was fine
New o rings
New return hoses.
Changed the oil
Fired her up and she quieted down.
Threw it a few revs, and she started to stutter a bit.
Ran it for a bit
Smoke cleared up.shut it down to do a few more things. And a rush of coolant came from under the truck.
So, to everyone that mentioned MMO,
Do you think it’ll help?? Lol
Block #2. Destroyed!
You must be registered for see images attach
IDIoit
MachinistFabricator
Welp, glad I have another block in the shop. Kinda hinders my plans for my next IDI, but that’s the way the connecting rod fails lol
DrCharles
Full Access Member
Forget MMO, this is a job for JB Weld!!
Thewespaul
Full Access Member
You are the only one I know that keeps grenading these blocks. Pretty crazy carnage
FarmerFrank
Full Access Member
And your sure it wasn't like this before you changed the oil?
Probably from putting that tester on and giving it too much pressure.
Sent from my iPhone using Tapatalk
Probably from putting that tester on and giving it too much pressure.
Sent from my iPhone using Tapatalk
IDIoit
MachinistFabricator
at 13 psi? not likely. it would rip apart the welds on the radiator first.
Thewespaul
Full Access Member
Did you use vasoline on the injector o rings? That’s probably what did it.
DrCharles
Full Access Member
Or maybe too-restrictive muffler bearings?
Similar threads
