pulling cowl- how much work?

pybyr

Full Access Member
Joined
Dec 2, 2009
Posts
447
Reaction score
0
Location
Adamant, VT
How much work/ time, and removal of other stuff, is involved in pulling the cowl (panel between hood and base of windshield) on an '89 bricknose?

Reason that I ask is that my truck never had a radio or FM antenna (it was originally a military firefighting rig) and it looks as if the only way I can get to the grommet that the antenna cable goes through is by removing the cowl.

Any tips, etc., much appreciated.

Thanks

Trevor
 

Diesel_brad

Dunce
Joined
Nov 8, 2008
Posts
6,099
Reaction score
5
Location
gilbert pa
There are a couple screws along the edge by hood ,the screws also holds weather stripping. there are i think 4 screws from the top. remove the wiper arms and sneak the cowl out.

I would put some making tape on the edge of the hood and top of the cowl so you dont scratch it
 

MIDNIGHT RIDER

Full Access Member
Joined
Sep 29, 2005
Posts
4,702
Reaction score
142
I am un-certain if there is any difference between my 1985 cowl and your 1989; I don't think so, but not sure.

On my 1985, without removing the hood, it was nigh impossible to remove the cowl without both flexing the cowl quite a bit, almost to the point of kinking it, and skinning about three square feet of paint off both it and the hood.


Then, one day, I had reason to have that chrome windshield trim piece off, and the cowl came off easy as pie.

So, next time I have reason to remove the cowl, that windshield trim piece is gonna get removed first. ;Sweet
 

94turboidi

Full Access Member
Joined
Jan 9, 2010
Posts
813
Reaction score
1
Location
Ne So. Dakota
Yeah I had to remove mine last year, its a 94 and I wish I would have just removed the hood or something but I didn't have any help at the time. It was kinda tricky getting it out. I wonder if removing the windshield trim would have helped me. I think I might have put a little kink in mine when I removed it also.
 

pybyr

Full Access Member
Joined
Dec 2, 2009
Posts
447
Reaction score
0
Location
Adamant, VT
Thanks, everyone. I'm beginning to think of trying to look at other places I could put my FM antenna...
 

lotzagoodstuff

Full Access Member
Joined
May 19, 2007
Posts
2,836
Reaction score
832
Location
Carmel, IN
Thanks, everyone. I'm beginning to think of trying to look at other places I could put my FM antenna...

Just a quick FYI: they used to sell really nice stick on thru glass antenna's for trucks. I used one on an S10 that had a radio delete years ago, and I thought it worked pretty well, supposedly like 70% of hard wired antenna, which is pretty good unless you live in a remote area I guess.

Just a thought, good luck whichever way you go.
 

sassyrel

Registered User
Joined
Apr 27, 2005
Posts
3,714
Reaction score
1
Location
iowa
I am un-certain if there is any difference between my 1985 cowl and your 1989; I don't think so, but not sure.

On my 1985, without removing the hood, it was nigh impossible to remove the cowl without both flexing the cowl quite a bit, almost to the point of kinking it, and skinning about three square feet of paint off both it and the hood.


Then, one day, I had reason to have that chrome windshield trim piece off, and the cowl came off easy as pie.

So, next time I have reason to remove the cowl, that windshield trim piece is gonna get removed first. ;Sweet
and THAT, be the correct answer,,been there tooooo often--
 

riotwarrior

Full Access Member
Joined
Sep 19, 2006
Posts
14,782
Reaction score
492
Location
Cawston BC. Canada
Pulling the cowl is actually very very easy. Done about 5 or 6.

1 windshield trim
2 wiper arms
3 there are about 4 screws at base of windshield
4 maybe 8 screws on forward edge, you can then gently pry up on one end...carefully and pop off the cowl.

Simple nuff now once off....watch that there washer squirter too....
 

Forum statistics

Threads
93,030
Posts
1,156,242
Members
26,619
Latest member
crispy74

Members online

Top