79jasper
Chickenhawk
Whoops... I meant tuned....
I believe the harnesses are different.hpop is no issue.they say the splits wont run right.I ran splits in my first engine with 95 pcm and no chip.ran perfectly fine and quieter than single shots.
Just use all the wiring from the parts truck.youll need to change the valve cover gaskets and harnesses unless your 99 motor has the 2 connector gaskets.using the motor out of the parts truck will make the fuel system easier to deal with, unless you want an electric fuel system wich is the way to go anyways.
The van harness iirc is too short to reach the trucks harness.I put a van motor in mine, there was a reason I didn't use the perfect harness from the van.my harness was and still is junk
I believe the harnesses are different.hpop is no issue.they say the splits wont run right.I ran splits in my first engine with 95 pcm and no chip.ran perfectly fine and quieter than single shots.
Just use all the wiring from the parts truck.youll need to change the valve cover gaskets and harnesses unless your 99 motor has the 2 connector gaskets.using the motor out of the parts truck will make the fuel system easier to deal with, unless you want an electric fuel system wich is the way to go anyways.