No Idle

dieselviznince

Escanaba MICHIGAN
Joined
Feb 8, 2007
Posts
76
Reaction score
0
Location
Escanaba MICHIGAN
:hail Anyone got any idea why a 88 7.3 wont want to idle Just put the junk ipump back on and seems to run ok but wont idle does the pump need to timed by tippin it, or might it be somthing else, I believe my lift pump is good.:confused:
 

Agnem

Using the Force!
Supporting Member
Joined
Jan 10, 2005
Posts
17,067
Reaction score
374
Location
Delta, PA
Did you try setting the idle speed screw?
 

Agnem

Using the Force!
Supporting Member
Joined
Jan 10, 2005
Posts
17,067
Reaction score
374
Location
Delta, PA
Turn it clockwise to increase the idle speed. Correct idle is 650 RPM.
 

dieselviznince

Escanaba MICHIGAN
Joined
Feb 8, 2007
Posts
76
Reaction score
0
Location
Escanaba MICHIGAN
Ok its been a while but I turned up the idle screw now diff could it be my cold start selonoid or bad fuel I have 33% oil in the fuel now or could it be a bad injector. Or what if my timeing is one tooth off.????
 

shorthair

Full Access Member
Joined
Oct 9, 2005
Posts
159
Reaction score
0
Location
vancouver wa.
thats what I thought your running waste motor oil. if you are going to do that you have to prefilter it to less than 10 microns which is what our stock filter is & run it through a water seperator. Otherwise you get a goooo in the filter that will cause very rough running & in a very short distance shut your motor down. Also do not use more than 5% waste synthetic oil try to only use mineral oil if you do & filter properly blends of over 90% wmo to dino are possible in warm weather.
 
Top