While I was crawling around on the motor removing injector connections (’93 F350 7.3, early Banks Sidewinder), my clothing pulled off a wire and I don’t know where it goes. The clue is that it is the red/white striped wire coming from the direction of the firewall (yellow arrow) in the loom serving the glow plug relay. The wire runs a good 2.5 feet once it leaves the loom just below the yellow arrow (with several splices done by PO) – it does NOT connect to the relay and it terminates in a round push on connector (white arrow). If I knew what the red/white striped wire is supposed to connect to, I’d sleep a lot better. Any help very much appreciated. Merry Christmas!