My 6.9 wont start!!!

egtrucking805

Registered User
Joined
May 11, 2009
Posts
9
Reaction score
0
Location
Santa Maria Ca
I cant get my 6.9 too start, I am getting fuel to that part that all the injector lines come out of. I pulled it off & tried to clean it, it was a little neglected, old fuel & a little water. Do I just find a good used one? Or maybe I can get some good advice? Thanks!!
 

icanfixall

Official GMM hand model
Joined
Apr 10, 2005
Posts
25,858
Reaction score
673
Location
West coast
This sounds like you are posting that you removed the injection pump. If so did you remove it from the housng that has 4 long bolts holding it to the block.... I sure hope so. If you saw the gear in the housing you did the wrong thing and now its going to be difficult helping you get it back on the motor properly. These pumps have 3 nuts that hold them to the gear cover ad removing the oil fill spout there is 3 small bolts with a 5/16 head that drives the pump off the pump gear. When you cleaned out the old fuel and water did you take the top cover off the injection pump. If so was there any rust in thechamber...
 

Forum statistics

Threads
91,376
Posts
1,131,364
Members
24,177
Latest member
RangerDanger

Members online

Top