IP Pump

[Worstenemy453]

Ive read about turning the IP up. Im snatching Autometer EGT and Trans gauges on Ebay right now. Im keeping my truck N/A and will buy some BB injectors shortly. I wouldnt mind a little smoke cuz i will be doing stacks soon but i dont want too much. How many turns should i turn it and which one am i turning ?

 

[icanfixall]

Probably nobody will tell you how to do this before you install a pyro. If you know how to "turn up the fuel" first without a pyro you very easily will melt a piston. You really need to know how hot the exhaust is before you attemp turning up the fuel. Most na motors run hotter than turbo motors because a turbo pushes in much more air to cool the cylinders and exhaust. Its not a hard thing to do and many can and will explain how its done properly and safely.... About all you need to do is turn the allen wrench one flat. Thats all it takes usually. I think Banks turns the pumps up 1 1/2 flat and go from there. They usually send you on your merry way with a pyro up around 950 degrees and 1050 is there recommended top temp....

 

[Worstenemy453]

Im not going to turn it up before i get my gauges in. I just was asking now instead of later.

 

[OLDBULL8]

Search, must be 5000 post's on that.