installation instructions for injection pump?

[912504x4]

I am going to try installing a fuel injection pump on my 91 7.3 and wondered if anyone has the install instructions available for me. I have put PBblaster on all the fuel lines and bolts that I can see so hopefully everything will cooperate with me.
I dont have a Haynes manual or anything but I do have the ability to do this as long as I know the pitfalls first.
Do I need to prime the new pump or anything like that or will the fuel pump cover that?
Should I roll it over to top dead center first or does that not matter. Seems like the pump will come with a keyway for timing but I wasnt sure.
Is there anything else I should worry about or get on order before I do this?

Thanks, Eric

 

[94f450sd]

here ya go

http://oilburners.net/brian/idi/FuelInjectionServicing.htm

 

[94f450sd]

in that article it says you need a 16 point socket to remove the 3 bolts holding the gear to the pump.that is wrong you need a regular 12 point socket.also DO NOT remove the pump gear housing!!!!!!!!!!

 

[OkieGringo]

http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/0a/34/ba/0900823d800a34ba.jsp AutoZone Page for Injection Pump and install instructions. No I don't work for AZ. OkieG