CSARebel916
WMO Burner
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Well here's my setup. Its still in construction. I am planning on installing another pump and 2 more filter heads. As of now this is what I have:
Clear water pump - 1/2 hp
1in pvc piping
2 filter heads, 1 has 10m filter and the other has a 5m filter
Bucket heater from Tractor supply
Settling barrel (little barrel in the pic)
Mixing barrel (big barrel)
The plan is to instal 4 filters all together. A 20, 10, 5, and a 1 micron filter.
My mix consits of about 60% hydro fluid right now and 40% #2 diesel. I like running k1 but pump diesel is cheaper right now. As for the hydro fluid, I ended up with about 300 gallon for free, but once its gone I will be going back to my WMO. ;p
I heat the little barrel up to 150-160 degrees for about an 1/2 hour, then let it sit for about a day. I have a magnet in the bottom to caught any metal particals in the oil. Next I reheat it to about 100 degrees and use a small pump to transfer it into the bigger barrel. I then add #2 or k1 and turn the heater on. I get it to about 100 degrees again and start the pump. It pushes through the filter heads great! I have a "T" in the piping with 2 ball valves that I can shut the line off to the mixing tank and redirect it to another line that I can put right into my truck tank.
If anyone has questions , or comment please dont be afraid to speak up. I have done alot of trial and error, and I just keep trying to better my system!
Thanks Chris