HELP! Fuel leak

Agnem

Using the Force!
Joined
Jan 10, 2005
Posts
17,067
Reaction score
386
Location
Delta, PA
Thought I smelled something, so I started looking around. The whole bottom passenger side corner of the core support mouint area, frame, lower part of the battery, overflow tank mount, etc. is coated in diesel fuel. Wiped everything down real good, and I got a leak all right, but I'll be darned if I can tell where it is coming from. I can't see the source, but I can see the drip. I also can't see where it is "flying in" from, thanks to Mr. Fan. The drop lands on the plastic skirt right over the frame rail next to the core support mount, and under the battery area. I'm sure the fan is blowing it, but I don't think it is slinging it. What in the devil is fuel doing up this far? I tried following the fuel line, but got lost in the ATF piping. Does anyone have a diagram of fuel flow? I don't think it is coming from the fuel filter drain, an this is too far forward. :dunno
 

NCheek

Howdy
Joined
May 18, 2008
Posts
722
Reaction score
0
Location
College Station, TX
Highest point has got to be the fuel filter... My guess is that is where it originated from. If it's been a while since you change your fuel filter, the big o-ring on the lid is prone to give out and cause a massive release of diesel. Maybe it is running along a tube/ hose/ wire till it reaches it's forwardmost destination. :dunno
 

Double-S-Diesel

parts seller
Joined
Mar 8, 2005
Posts
2,533
Reaction score
88
Location
derry pa
Id say its from the fuel filter drain, the orings are probably not sealing common problem.
the end of the tube is about even with the pass side head
 

Agnem

Using the Force!
Joined
Jan 10, 2005
Posts
17,067
Reaction score
386
Location
Delta, PA
Alright. I'll double check that then. I replaced the fuel filter a couple of months ago. I got one that had an integrated cap. It didn't seem to be leaking at all up there, so the drain would be my best guess. There is no chance it is coming out of the cold side intercooler boot I hope. That would be weird if it was.
 

Agnem

Using the Force!
Joined
Jan 10, 2005
Posts
17,067
Reaction score
386
Location
Delta, PA
Well I didn't have time to mess with it, so I'm still driving around with the leak. Is there an easy way to stop up the drain to prove that is what it is? If is IS the drain, what is the correct fix?
 

Dsl_Dog_Treat

I lost my face to the jaws of a poodle
Joined
Jan 13, 2005
Posts
7,191
Reaction score
161
Location
Decatur,MI
Well I didn't have time to mess with it, so I'm still driving around with the leak. Is there an easy way to stop up the drain to prove that is what it is? If is IS the drain, what is the correct fix?

Do what my friend did with his PS. Let a friend drive it and try to burn it up.;Poke
 

Agnem

Using the Force!
Joined
Jan 10, 2005
Posts
17,067
Reaction score
386
Location
Delta, PA
Anybody have a picture of a motor out of a truck, that I could see where this drain tube is? Damn thing is so stuffed in there. :dunno
 

Agnem

Using the Force!
Joined
Jan 10, 2005
Posts
17,067
Reaction score
386
Location
Delta, PA
OK, so the first night I put a hose on it. Seemed to help a little.
Last night I replaced the valve. All $40 worth. Yea, I know all it needed were O-rings, but I'm not cheap. LOL

What a pain in the frickin' butt to change that thing!

I had to unhook the IDM to get room for my tool to swing. What a bunch of wires and crap that is. I can't wait until they are 20 years old and brittle. :rolleyes:

I see a lot of junk laying down in the V of the engine. Where is the turkey pan? What covers the lifters on this thing? Where does those acorns, leaves, nuts, junk and other crap that seems to be piling up down there go, and how do you clean it out?

I still have my doubts as to if this was my problem or not. There must be so much fuel laying some where that it is going to take a while to clear it out. I hope.....
 

trackspeeder

Stone crusher.
Joined
Dec 21, 2003
Posts
4,135
Reaction score
290
Location
North Branford. CT
Don't toss the old valve. Replace the o rings and toss it on the shelf. You might need it down the road.

The thing you unhooked for your tool, would be the glow plug control module. The ex has the electronic gizmo for the glow plugs.:D

Use your shop vac to clean the valley of death.:eek:
 

Agnem

Using the Force!
Joined
Jan 10, 2005
Posts
17,067
Reaction score
386
Location
Delta, PA
Really? That thing with the heatsink is glow plug related? What's the GPR for then? Is there a drain in that valley of death? LOL where does it come out?
 

Agnem

Using the Force!
Joined
Jan 10, 2005
Posts
17,067
Reaction score
386
Location
Delta, PA
Well the verdict is in. That was NOT my problem. The passenger battery is still soaked in diesel, along with everything else in that area. ***! I'm ready to take a baseball bat to this thing. :mad:
 

Russ

Idont do injectors
Joined
Jan 5, 2005
Posts
3,421
Reaction score
4
Location
New Brighton PA
MEl, I just had to change out a high pressure fuel hose on m dads 97. Goes from the fuel reg. to the heads. It was leaking LOTS of fuel though. His was the one on the pass. side. Just a thought. Not sure if the X has the same set up though.
 

Forum statistics

Threads
93,001
Posts
1,155,994
Members
26,589
Latest member
tke395

Members online

Top