Those are the ones you showed me when we timed your 6door???
To bad cuz them are purty in person!
Sux to see that issue.
To bad cuz them are purty in person!
Sux to see that issue.
Harland Sharp rockers for the IDI
- Thread starter 88 Ford
- Start date
Well crqp..that geometry wont work.....back to math class grade 8 maybe 9 iirc for that issue.
Best docume t **** outta it and talk to H S
Carl, yep the same ones i showed you.
Al, correct. they will get fixed, gotta install cam and make sure pushrod alignment is golden.
dont wanna correct one issue and run into another.
Al, correct. they will get fixed, gotta install cam and make sure pushrod alignment is golden.
dont wanna correct one issue and run into another.
Cam, lifters, and pushrods mocked up
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Last edited:
Sumptin aint right man...pushrod gonna rub...geometry way out on those for sure!
Can they be swapped left to right on the shaft? Not seeing them in person I don't know how they are put together. I'm sure if it was that easy you would have already done that.
no they cant be swapped, the pressed rocker shaft only allows the rocker to be installed 1 way,
I got a e-mail into the guy I purchased them from
we will see what he comes back with.
heres a comparison with another set, you can tell these are obviously incorrect.
http://www.ford-trucks.com/forums/1406284-harland-sharpe-roller-rockers-2.html
I got a e-mail into the guy I purchased them from
we will see what he comes back with.
heres a comparison with another set, you can tell these are obviously incorrect.
http://www.ford-trucks.com/forums/1406284-harland-sharpe-roller-rockers-2.html
After messing with it, you were right Tom.
They were assembled incorrectly.
Most likely a dodge guy put them together.
I was able to get the shafts out of the roller bearings, swap shafts and everything looks ok.
I guess I'll find out when I shorten a pushrod.
They were assembled incorrectly.
Most likely a dodge guy put them together.
I was able to get the shafts out of the roller bearings, swap shafts and everything looks ok.
I guess I'll find out when I shorten a pushrod.
You must be registered for see images attach
You must be registered for see images attach
sjwelds
Full Access Member
Even I can tell that looks waaaay better 
Brian...is it an optical illusion or am I on the ball.
The rockers rollers seem willy nilly in depth...ones on far left seem to stick out more than others from body of rocker???
The rockers rollers seem willy nilly in depth...ones on far left seem to stick out more than others from body of rocker???
How does this happen?
Your product speaks for your business!
Bummer ya had to fix on them, cool you could!
Your product speaks for your business!
Bummer ya had to fix on them, cool you could!
the rockers are just floating.
no pushrods.
what youre seeing is some of the rockers not all the way against the valve stem.
Keep on it!
Here's a'hopeing it all shakes out!
Here's a'hopeing it all shakes out!
bbjordan
Snow Monkey
50/50 chance of getting it right. Sheesh!
Those rockers are obviously crap. Send them to me and I will dispose of them properly.
Those rockers are obviously crap. Send them to me and I will dispose of them properly.
