glow plug bypass

[jonathan]

from what i understand i have to remove the white wire and run a wire from were the the white wire was into the cab and run another wire from a 12 volt spot to the cab then hook up the push button. does that sound about right?

 

[greasemonky]

1.Disconnect all wires from the timer.
2.Run one small wire from the always hot terminal to the small terminal where the red was from the timer.
3.From the other small terminal where the white was run wire to cab switch and then simply ground it.
No other power needed since you are feed power to one small terminal. I can post a pic if needed.

 

[TWeatherford]

There is a tech article that details how to do it. Very nice writeup, easy to follow.

 

[jonathan]

There is a tech article that details how to do it. Very nice writeup, easy to follow.

yeah ive read it i dont really understand it though

 

[jonathan]

1.Disconnect all wires from the timer.
2.Run one small wire from the always hot terminal to the small terminal where the red was from the timer.
3.From the other small terminal where the white was run wire to cab switch and then simply ground it.
No other power needed since you are feed power to one small terminal. I can post a pic if needed.

can you post a pic please

 

[greasemonky]

See the little loop wire at top of the relay It looks pink. This is the hot to the small terminal. Now if your ground the small terminal at the bottom of the relay it kicks on. So that wire runs up to the cab switch then from the switch to a ground. Never mind the yellow it can be unhooked. I guess I forgot that one but it's harming anything.