Hi all I bought this old truck to build into a bush truck snowmobile hauler. I like the simplicity of these engines that’s why I picked this truck. I put in new glow plugs already which sucked as the ends were swelled but got them with my slide hammer and vise grips. I have a small fuel leak on the fitting from the filter to the injection pump. Is there supposed to be a seal on that line? Currently there’s nothing and the nut seams to thread on till it bottoms out. Also it’s hard starting after sitting a while and the throttle is very slow to respond. I’m sure it’s all due to this leak. I’ve attached a picture of the fitting for reference. Thanks in advance for any advise. Totally new to these engines.
You must be registered for see images attach