NMB2
Dunce
I made a new ride along video. This is the most recent, at about an hour ago.
I recently installed the new boost gauge so I could get actual readings as my 15psi gauge just pegged itself out.
Maxed my gears out (ZF5 and 4.10's) and EGT's are very much under control... no higher than 1050 at WOT for a long period. Also I will note that I have taken comp housing and intake hat readings approx 5-10 seconds after stopping the truck, and comp housing and turbo hat is always between 110-130* after pulling hard runs like this, which tells me that my intake charge is at very reasonable temps.
Also take note that my EGT's are that high at the start when I get in it, because I just got done doing the same type of run to get it warmed up and test it out.
Enough talking, here is the video. Comments welcome
http://youtu.be/Va2aTVXAwQc
I recently installed the new boost gauge so I could get actual readings as my 15psi gauge just pegged itself out.
Maxed my gears out (ZF5 and 4.10's) and EGT's are very much under control... no higher than 1050 at WOT for a long period. Also I will note that I have taken comp housing and intake hat readings approx 5-10 seconds after stopping the truck, and comp housing and turbo hat is always between 110-130* after pulling hard runs like this, which tells me that my intake charge is at very reasonable temps.
Also take note that my EGT's are that high at the start when I get in it, because I just got done doing the same type of run to get it warmed up and test it out.
Enough talking, here is the video. Comments welcome
http://youtu.be/Va2aTVXAwQc