ISPKI
Welding/metallurgical engineer/Metalsmith
Well heres a mockup of what im thinking. The housing is 1/16" 304 while all of the fittings attached to the tank are stainless, either 303 or 316 and are welded to the tank. Valves are brass with viton seals although they have those in steel and stainless as well for a bit extra. I have the sheets and the clear tubing, the hardware is ~70$. Next thing I am looking at is attaching a kitchen drawer rail so this can slide in and out of an underbed mounted toolbox. The hose would exit the box thru a pair of grommets. Each hose would feed one of the fuel tanks on the truck.
You must be registered for see images attach