dyno #

[HVACfarmer]

Has anyone with an IDI had their truck dyno'ed and what was
your results?
mine was wheel hp 182.5 @2800 RPM 6.3 lbs. boost exh temp 785 degrees
wheel torque 382.6 @ 2000 RPM 6.8 lbs boost exh temp 788 degrees
pump not turned up. Banks down pipe and 4" exhaust with resonator.

 

[cashiuscasualty]

i dynoed mine when i was in class and it made 105hp and 210 tq, no turbo or anything, just a stock 87 6.9 with a c6 and 3.55s i believe in the rear

oh and free flowing exhaust.

 

[Optikalillushun]

Sup Casey

 

[Diesel JD]

Good numbers. Almost as high as Travis had except he had higher egts and a maxed out injector pump.

 

[HVACfarmer]

So does this mean its not as big as a pooch as I thought it was?
After having the timing set fuel economy is 10 mpg pulling 31 foot travel trailer,
up from 8.6 before. Driving empty at 65-70 13 mpg.
Pulls better but not as good as hoped, wish could try pulling with another IDI or powerstroke for comparison.

 

[IDIeselman]

Darrin put big Ed on the dyno in holland and came up with
183 HP 325 TQ 1st pull no LPG

205HP 362 TQ 2nd with gas

 

[argve]

I believe the Enterprise turned 201 hp and 387 torque at the rear wheels. Didn't pay any attention to the egt numbers. This was with a 7.3 banks sidewinder (wastegated) straight piped 3.5 inch exhaust - E4OD and 4.11 gears Dually. Pump was massaged a little. No drugs at that time.

 

[Optikalillushun]

Numbers arent that bad considering the amount of boost these engines utalize.