DOOR HINGE PINS ???

[MIDNIGHT RIDER]

Are the top and bottom door hinge pins the same ??

I recently bought several packs for my Dodge fleet, with two pins/four bushings, enough to do both top and bottom, for less money than the same brand has the Ford pin for; the part number for Ford doors only comes with one pin/two bushings/one E-clip, only enough to do half a door.

The number I have is 38410 HELP brand.

Dorman and MotorMite both have this same part number, also only one pin per pack.

Are the top and bottom pins the same ??

Thanks.

 

[dbensen]

The bushings are the same but you are correct, the pin length is different. I found mine at NAPA a few years back and if I remember correctly the pin had two places for the C ring so you only had to buy one package , you just need four of them. Hope this helps.
Good luck,
Doug

 

[Double-S-Diesel]

the pins are actually different lenghts, if ya look at the replacements you will see 2 notches for the clip. on the top hinge it uses the shorter slot and on the bottom it uses the longer one.
the PN you have is correct.
just did my 95,