Anyone know part numbers for all the tie rods for a D60? Mine is an '86 king pin axle if that makes a difference. I believe the sleeves are both ES2012S. DS1068 for the long part of the drag link. DS1071 for the long tie rod attaching at passenger knuckle with the drag link bolting to it near pass knuckle.
I'm confused on the short tie rod ends at the steering box and the drivers side knuckle. Are these the same part? I'm seeing at least 3 different part numbers and some variation of standard and metric thread. ES3009R I think is right for one of them (both? Says outer in some listings) but I also see ES2392L (outer?) and ES2615R (at pitman arm?). I've replaced several of these but always spaced out far enough that I go through this same fiasco every time. Parts jockeys are useless and just order one unstocked part at a time until a week later you'll be lucky to have everything you need.
I'm confused on the short tie rod ends at the steering box and the drivers side knuckle. Are these the same part? I'm seeing at least 3 different part numbers and some variation of standard and metric thread. ES3009R I think is right for one of them (both? Says outer in some listings) but I also see ES2392L (outer?) and ES2615R (at pitman arm?). I've replaced several of these but always spaced out far enough that I go through this same fiasco every time. Parts jockeys are useless and just order one unstocked part at a time until a week later you'll be lucky to have everything you need.