Clutch Slave Cylinder ?

[SIKPUP]

Clutch Slave Cylinder ? NEW ?

Parts guy was wrong ! What make slave cylinder has a bleeder screw ?

The clutch pedal just went to the floor, something just let go ! but I don't know what end it was.. The truck has all original parts for m/c, hose and slave cylinder.....I will replace all of them. 1993 F-350 CC, 2wd , 5speed ZF 145,000 miles and original clutch.

It broke after leaving my parents house, and I was able to drive it back to their driveway. At least it's not on the side of the road for the long weekend.

Thanks,
Mike

 

[Joe Mc]

All slave cylinders have a bleeder. Some have the standard brake looking bleeder and others have a small allen screw located on the top front corner of the slave cylinder facing the drivers side, if I recall correctly.

 

[LUCKY_LARUE60]

Not all slaves have bleeder's, My slave went out and I got a replacement and no bleeder. Installed it and did get it bleed but man was it hard to push. Went back and the parts guy found one for a 90 F 450 that was the right one and all is well. If you get one with no bleeder chanches are it is the wrong one.

Jim