Turbo idi Mike
Registered User
Ok so I was planning on building a Turbo idi engine for my 87 F250 but ended up selling it before that happened so going to sell all my engine parts. i will sell all of them or anywhere in between and I will ship also if needed or can pick up locally in SC. Make me a list of what all you are interested in purchasing and your zip code and will try to work out a deal. Or can setup a Buy It Now auction on Ebay if you would prefer.
9 NOS Ford idi Turbo pistons with pins and rings .020
1 NOS Ford idi Turbo piston and pin only
3 Motorcraft reman idi Turbo connecting rods
5 used good idi Turbo connecting rods
1 Serpintine belt and tensioner update kit
8 Melling cylinder sleeves
8 Ford NOS long no longer available pre glow plug chambers. Aftermarket ones are made in china and made of stainless and not correct iconale alloy
2 NOS 6.9 head gaskets
2 Victor Reinz 7.3 idi head gaskets
2 Victor Reinz exhaust manifold gaskets
1 Felpro intake manifold gasket pan
2 Victor Reinz valve cover gaskets
1 Ford nos timing cover gasket, crank seals, and installer set
20 Sealed power push rods
20 NOS Ford and Clevite valve springs
8 Sealed power idi turbo only exhaust valves
1 Federal Mogul camshaft bearing set
1 Enginetech .010 over connecting rod bearing set
1 Enginetech .010 over main bearing set
1 Felpro intake and exhaust guide seals
3 NOS Ford, Perfect Circle, and Sealed power rocker arm sets
1 NOS Ford serpintine belt power steering pump pulley
1 NOS made in USA Airtex water pump
2 Fuel pickup socks
1 orifice tube
1 injector line clamp
1 NOS Ford transfer case bushing
4 NOS Ford transfer case shifter bushings
4 injector line rubber seals
I also have two turbo kits. One complete with rebuilt turbo and new intake wheel. It is ATS with the larger downpipe and is complete. I also have another factory Ford turbo kit that is complete but the turbo intake housing received some damage but otherwise is fine. I will try to get pictures of the turbo kits soon. Gotta finish cleaning out the garage so I can get to them. Oh yeah almost forgot, I have a 93-94 idi Turbo flex plate and hardware that is ready to bolt on. This is only ford the factory idi Turbo engines. Thanks, Mike
9 NOS Ford idi Turbo pistons with pins and rings .020
1 NOS Ford idi Turbo piston and pin only
3 Motorcraft reman idi Turbo connecting rods
5 used good idi Turbo connecting rods
1 Serpintine belt and tensioner update kit
8 Melling cylinder sleeves
8 Ford NOS long no longer available pre glow plug chambers. Aftermarket ones are made in china and made of stainless and not correct iconale alloy
2 NOS 6.9 head gaskets
2 Victor Reinz 7.3 idi head gaskets
2 Victor Reinz exhaust manifold gaskets
1 Felpro intake manifold gasket pan
2 Victor Reinz valve cover gaskets
1 Ford nos timing cover gasket, crank seals, and installer set
20 Sealed power push rods
20 NOS Ford and Clevite valve springs
8 Sealed power idi turbo only exhaust valves
1 Federal Mogul camshaft bearing set
1 Enginetech .010 over connecting rod bearing set
1 Enginetech .010 over main bearing set
1 Felpro intake and exhaust guide seals
3 NOS Ford, Perfect Circle, and Sealed power rocker arm sets
1 NOS Ford serpintine belt power steering pump pulley
1 NOS made in USA Airtex water pump
2 Fuel pickup socks
1 orifice tube
1 injector line clamp
1 NOS Ford transfer case bushing
4 NOS Ford transfer case shifter bushings
4 injector line rubber seals
I also have two turbo kits. One complete with rebuilt turbo and new intake wheel. It is ATS with the larger downpipe and is complete. I also have another factory Ford turbo kit that is complete but the turbo intake housing received some damage but otherwise is fine. I will try to get pictures of the turbo kits soon. Gotta finish cleaning out the garage so I can get to them. Oh yeah almost forgot, I have a 93-94 idi Turbo flex plate and hardware that is ready to bolt on. This is only ford the factory idi Turbo engines. Thanks, Mike
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach