79jasper
Chickenhawk
No, just the center tube.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Really they sent me a long block that had holes with stripped threats as u can imagine I was pissedYes, promar is better, so far.
See not telling everyone this was a brand new Promar rebuilt engine from the beginning would have helped immensely!!!Really they sent me a long block that had holes with stripped threats as u can imagine I was pissed
See not telling everyone this was a brand new Promar rebuilt engine from the beginning would have helped immensely!!!
Call them tell them to pick it up and return it if the bolt holes are stripped and the oil cooler is leaking.
Have you had a shop install this engine or your self.
Again I ask for as much detail as you can provide...preferably in one post!
I installed it and well I fixed the hole and put in slightly larger bolts also the intake didn't fit at first to me sloppy job on there part their answer was not their problem, and it was just a long block so the oil cooler is mine of my old truck my assumption is since it sat with no fluids for a few months the boring dried up and are no longer good
Go to advanced search type in oil cooler rebuild and read the threads already posted on this exact subject. There are lots and lots.I am having some difficulty getting it out due to clearances anyone have advice on how they would do it?