0-60 video tying to compare to what yours does

[Hydro-idi]

No video but 0-45 in 18.02 seconds

What kind of truck do you have? Sounds like something is wrong with it if it's that slow.

 

[chris142]

What kind of truck do you have? Sounds like something is wrong with it if it's that slow.

A ford! LoL..87 f250 with a 6.9,4speed and 3.55 gears. Fuel turned up as much as I dare and the timing set with my meter.

 

[Macrobb]

For reference:
http://bankspower.com/magazines/show/486-Banks-Sidewinder-Turbo

You must be registered for see images attach

With a /brand new/, 5k mile 7.3 and banks turbo, and E4OD.

Now... worn out NA IDIs will put down a lot less HP, as far as I can tell, so they would be much slower.
One local 7.3 put down 85 HP at the wheels(vs the 135 for a new 92)...

Here's another point of reference: "Project 300", with a worn 6.9 making a whopping 95 HP at the wheels: http://www.trucktrend.com/how-to/engine/0905dp-1987-ford-f250-buildup/photo-gallery/#photo-12

Also, this calc seems fun to play with... the numbers seem reasonable: http://www.060calculator.com/
Using that calc, for a 6,600 lb truck(about what my 88-93 extended cab long bed IDIs weigh), and using a factor of 1.37 for RWHP vs crank HP(185 rated HP vs 135 wheel HP new) would mean a 90RWHP IDI would do a 0-60 in about 16.5 seconds.

 

[03wr250f]

n/a my 0-60 was around the 18 sec time
turbod now i have no idea. I can tell you I can shift faster than my transmission will, but I also havent timed myself.

 

[IDIoit]

xc_hide_links_from_guests_guests_error_hide_media