Search results

  1. 03wr250f

    e locker 10.25

    been wanting a e locker for several years now, And finally got around to it! made a short video about it as well
  2. 03wr250f

    fox shocks rox

    fox shocks are expensive but amazing. on a rsk super duty v code spring f350 leveled height holy moly the difference in ride over Bilstein 5100s fox resivior on the front pn#985-24-052 non resivior on the rear pn# 985-24-005...
  3. 03wr250f

    fox shocks are amazing

    89 f250 sas sky's rsk v code springs with Bilstein 5100 shocks on all 4 corners not super thrilled with the ride. very bouncy. it was marshmallowey when first put together, I added the front sway bar and it made the front stay squarer, and made the shocks work together instead of bouncing off...
  4. 03wr250f

    ATS 093/FACTORY TURBO CLEARANCE.

    I had some pictures of my turbo kit that I thought I would share. if you ever have the motor out of your truck, before you pull it, mark areas of the firewall that are close to the motor. Then when the motor is out, TAKE A SLEDGE HAMMER TO IT!!! You will thank me later. I cut the pinch weld on...
  5. 03wr250f

    How to set up a Reverse Shackle Kit

    How to set up a Reverse Shackle Kit Tools Needed Corded Drill, as it will put up with the abuse of lots of drilling and a reamer 7/8’’ reamer. Trust me it’s worth it to spend the money on it versus buying a harbor freight step bit. Air hammer and chisel bit Plumb bob, in a pinch a piece...
    • 03wr250f
    • Thread
    • 6.9idi 7.3idi babe babetheblueox dana60 idi rsk solid axle sparkles turbodiesel
    • Replies: 3
    • Forum: IDI Tech Article
  6. 03wr250f

    new toolbox

    I decided to change out my trucks' (babe the blue ox) tool box. a buddy of mine had a toolbox fuel tank combo for sale ended up being from my calculations about 45 gal tank and enough tool box to fit all my crap. lots of straps, air compressor, some tools, lots of idi parts like fuel hard lines...
  7. 03wr250f

    6.9 & 7.3 idi electric fan clutch conversion

    I made this kit to solve the issue of finding a good fan clutch for the idis. I prefer motorcraft parts for most things on my own vehicle. Since they are no longer available for our trucks I developed this kit as a solution for that issue. This kit comes with everything needed (except time and...
  8. 03wr250f

    Weird dash wiring gremlins

    I recently bought a 87 f250 6.9 4 speed extended cab long bed 4x4 n/a Lots of hacked up wiring and things hooked in to weird places When I got it the brake controller was hooked into the power wire of the brake light switch, backfeeding and causing brake lights to be on any time the battery...
  9. 03wr250f

    Oregon obs ford show!

    In case any of you guys live in the northwest and want to come to the biggest all obs show in the country, come next weekend to brooks oregon. All the details are in the link below, and myself and many Facebook and probably some oilburners members will be there. Even if your rig isn't able to...
  10. 03wr250f

    Dyno Day!

    Dyno day! 7.3 tidi r&d cold air intake, downpipe, stage 1 injectors, stage 1 drop in turbo, factory turbo cal ip maxed, stage 3 fuel system, hypermax intercooler, head studs, valve springs, SB 13" clutch, and water m3th on the last pull. 3.55 gears, zf5 dynod in 4th (1:1) 285/75-16s
  11. 03wr250f

    Selling upgraded drop in fans!

    Upgraded cooling fan! Completely drop in, bolt on upgraded fan! My 9 blade: 22" diameter, 8lbs 6 Oz, 324 sq. in. of blade surface area or 160% more fan area than stock. Factory 7 blade: 22", 7lbs 0 oz, 202 sq. in. of blade surface area Slightly more engine noise than stock, but not a large...
  12. 03wr250f

    Babe The Blue Ox

    I just wanted to do a thread on babe the blue ox, so figured I would show my truck off! 1989 f250 7.3 idi zf5 4.10 as it sits now and any questions about previous setups just ask R&d cold air intake, 3'' dp, stage 3 fuel system, stage 1 drop in turbo, stage 1 injectors, stage 1 cam, return...
  13. 03wr250f

    Unique Modifications

    Let's see something cool/unique/custom you have done to your vehicles Post pics/description whatever Yes their is sparkle powdercoat on everything including the alternator Sent from my SM-A015V using Tapatalk
  14. 03wr250f

    Water methanol injection

    My water meth setup Feel free to ask any questions ya have 5 gal ebay fuel cell with custom low level sensor tied into relay that powers progressive controller Aem water meth filter Aem 1/4" line Snow performance pum Snow performance VC-30 progressive controller (The map sensor is mounted...
  15. 03wr250f

    Aussie headlights for Bricknose 87-91

    Well in case yall havent heard what is going on in fakebook. the elusive austrailian headlights for bricknose 87-91 fords have been found. All the info you need is on their website. Obs solutions remade the original aussie headlights then found the originals shortcomings and fixed them A whole...
  16. 03wr250f

    How did you get into an IDI?

    I got reading this thread https://www.oilburners.net/threads/one-of-the-final-accessory-for-the-enterprise-up-for-grabs.19461/page-2 And there are a lot of great stories of how people came to own the trucks they love, I figured why not keep it going? I first started looking at an idi when I...
  17. 03wr250f

    Nitrous

    I have recently let my mind wander to the area of nitrous on a idi. I know next to nothing about nitrous, but when I asked around, the people I asked were familiar with nitrous and newer diesels, not idis. They basically told me you couldnt run nitrous on a idi without blowing it up. whatevs...
  18. 03wr250f

    Injectables?

    I am curious what everyones thoughts on injectables are? Propane, nos, water meth, ether lol! (any others?) I know most people gets scared especially with propane, but in small amounts I know that it can be beneficial. What are your guys thoughts? and what would/do you guys run, power...
  19. 03wr250f

    ferret out of business

    I know this is a crossover thread, but I saw this on the fte site, and figured you guys needed to know as well. https://www.ford-trucks.com/forums/1525153-well-crud-ferret-instruments-out-of-business-now-what.html
  20. 03wr250f

    gear lube test

    Found a pretty good comparison of gear lubes, while it may only be 75-90 and 80-90, and does not include 75-140 I think that conclusions can still be drawn, and lots of interesting information is in the study. If you are into reading college thesis style studies it is great, if not you might...
  21. 03wr250f

    Dyno sheets

    These are my dyno sheets from 2015 89 ford 7.3 idi zf5 4.10 285/75-16 Ats 093 wicked wheel 2 R&D 3'' Down pipe 4" exhaust Hypermax intercooler wastegated at 9.5 psi but only made 7psi on the dyno. baby moose pump @9* btdc and R&D stage 1 injectors
  22. 03wr250f

    Duralast clutch

    I am curious how many of you have duralast clutches in your trucks and how you like them? A while back I replaced my clutch and flywheel and went from a dmf to a smf. I used a autozone 12'' clutch kit to do it with. Everything went fine, and i have to say for being an autozone clutch it has...
  23. 03wr250f

    2-stroke oil in diesel

    I was shown this article on what the effects are of dosing diesel fuel with two stroke oil. It is a very enlightening read. Lots of good information. http://www.fuelexpert.co.za/2-stroke-oil-in-diesel-technical-study.php
  24. 03wr250f

    Head gasket parts list

    I am gearing up to pull the engine this winter and stud the heads. Most of this gearing up is preparing myself to pull the engine. lol. But i am still in a huge debate phase. I also have a spare 7.3 engine, but everything about it is unknown. I think over thanksgiving I will bring it back, as it...
  25. 03wr250f

    Relocated coolant overflow

    I am getting ready to install a cold air intake, so in order to make room, I needed to remove the coolant overflow and the windshield washer tank. For this I used a second washer tank and bracket from a junkyard. I documented this all for the coolant overflow, but I will be doing the same thing...

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,787
Members
24,099
Latest member
IDIBronco86

Members online

Total: 718 (members: 6, guests: 712)

Share this page

Top