Search results

  1. C

    6.9 + ZF5 owners please post your flywheel and clutch type

    Stock 6.9 flywheel, F 450 clutch,with a custom throwout bearing from FT. WAYNE CLUTCH it seems that they have an inexpensive smf kit on ebay
  2. C

    Need Help!!! Heating up issues :(

    I will check when I get home and see if I have a short wide shroud I have changed my rad to the tall narrow one.
  3. C

    New to Oil burners

    Welcome from what you guys call the south Okanogan.
  4. C

    For Those Of You Who Have Done The 6.9 Flywheel Swap.....

    It is my understanding that an 87 with a zf uses the dmf. The part # 07-076 is a dmf clutch kit, and it requires a custom throwout bearing, I do not remember the part number for that. It is the one I mentioned in a previous thread about this same subject. I have been running this set up for...
  5. C

    For Those Of You Who Have Done The 6.9 Flywheel Swap.....

    If you can source the pressure plate for the 6.9 flywheel you should be good, it should be around 5/8 inch deeper to accommadate the thinner flywheel. Look for cheeper jeepers photo album for referance.
  6. C

    Clutch Disk Options

    the distance from the fork to the pressure plate was longer to make up for the thinner fly wheel if I remember correctly. They machined one shorter and welded a small chunk in the fork slot to prevent spinning.
  7. C

    Clutch Disk Options

    I would call Ft. Wayne clutch and talk to them they have options besides what is advertised. They made me a specia throwout bearing for using the stock 6.9 flywheel with my zf trans in my 88
  8. C

    1961 Scout?

    Those are sliders look again. I learned to drive in one of those.
  9. C

    ebay smf clutch kit??

    The service from Fort Wayne Clutch is very good. I would expect satisfaction with that unit, when I need the next one that will be it.
  10. C

    Clutch recommendation

    so can any one tell me how bad is it when you use a solid hub clutch disc with the lucky mod or a smf from a 6.9?
  11. C

    Luk SMF and clutch $600

    PM sent
  12. C

    trying out a donor IP?

    I'm using this same pump, same configuration now, no problems. Waiting for time to install my turbo. By the way thanks Drew for the pump, works well.:love:;Sweet;Sweet
  13. C

    anybody got an alternator bracket laying around?

    Yeah I'm sure I do, although someone closer to you may have one also. Let me know if you want one of mine.
  14. C

    Not my day....Carnage pics.

    If it makes you feel any better I had to leave my truck 175 miles from home over night tonight lost gasket between acc. drive and air compressor. So tomorrow I get to go remove compressor install gasket, and reinstall compressor and fuel pump,then deliver load and return home. All to try again...
  15. C

    Tow and Haul RV transporter build

    He's running. Seen him in north east WA state last week, I think it was.
  16. C

    Snapon MT1480 Mistake For $99.00

    Is this complete and ready to use?
  17. C

    Ebay Starter

    +1 here Mine was like $118 delivered to WA state, and seems like a very good unit for the last year.
  18. C

    Starts with no key

    Yep take it to a locksmith.
  19. C

    Block Heater

    I have a cracked one in an 84 so yes they will crack. I wont use the block heater on an A block engine now.
  20. C

    New Toy...

    How u say in english I am so jealous
  21. C

    I want to remove the timing cover

    What Mel said when I did mine was just cautious not to allow movement of the gear. Not really any more difficult than swapping IP.
  22. C

    Brown Truck Under the Knife Project - Engine

    Yep I have done it before ain't gonna say it ain't a pita but it's possible. I did both sides
  23. C

    Installing AC

    thanks russ
  24. C

    Installing AC

    Not to hijack this thread, but will the engine side stuff from my 83 fit my 88
  25. C

    Banks Sidewinder Turbo Ford IDI

    Do you have any photos of the gauge? I may be interested in that

Latest posts

Forum statistics

Threads
91,304
Posts
1,129,983
Members
24,110
Latest member
Lance

Members online

Total: 535 (members: 1, guests: 534)

Share this page

Top