I have a new bushing which has an O.D. of 2.109" and the bushing bore is also 2.109". To snug of a fit I think. I have read on other forums that the bore should be machined/ honed out to 2.123 - 2.125". This would make the bore larger than the bushing O.D. which sounds like a recipe for another...
This 93 f250 7.3L has been in the family for the last 20 years, the transmission was rebuilt probably 10 years ago in some trans shop in Love lock Nevada.
So, no transmission problems until right before this happened. My uncle was driving it daily up until it started vibrating violently. The...
I am helping a friend replace the front drivers side and passenger side seat belts on her 2001 crew cab F-250 7.3L.
I just discovered that the seat belts that I grabbed off of a 99 single cab F-250 from the junk yard are not the same at all as the 2001s. The metal backing brackets are...
So my truck sat for a week while I waited for a new fuel pump to come in the mail........:backoff
It rained off and on during the week too, but the hood was down.
I got my pump this afternoon, installed it, bled the system via the schrader valve.
When I started it, it had a strange tick or...
I want to share the repairs I will be doing on my car and update it as I go.
There is a considerable amount of rust on the drivers side floor board, strangely enough, not on the passenger side. In fact the passenger side of the car on the exterior has no where near the amount of rust that the...
I have/had auto locking hubs with the 5 cap cover. I took them out and put in place the locking warn 11690 hubs.
From what I understand I need no conversion kit what so ever, but I had to take out a lock ring and a washer that sat behind the auto hubs to get the manuals to fit right.
I have...
Some one recently hit my parked '94 in on the passenger side head on.
Judging by the damage he was going pretty fast. His car was accordioned. I wouldn't be surprised if it was totaled. The bumper was shoved into the tire and part of the car went under the bumper and smacked the tire. It...
I stumbled upon this for $10!
It definitely a racor filter head and bowl, it appears that it may be a 220R.
It takes R24S filter which aren't that expensive!
Just thought I would share cause I know there are some people on this board who love pics and junk yard scores as much as I do. ;Sweet
Its a zf5 out of a 96 PSD f350 4x4. They will pull it out for me and guarantee it for a month if I fork over $850. I dunno if I can count on their guarantee. :dunno
This is the first functional (I can move the gear shift through the gears smoothly) zf5 I have seen here in the junk yards on...
After driving about 300 miles i discovered my oil cap was missing. This is strange because i haven't touched it since i changed the oil about a 1000 miles ago.
Their was a sound that tipped me off that something was wrong, it was a clanging sound coming out of the oil fill.
But...
I hooked up the vcv and drove My 76 300D around today!
It shifts through all th gears but tends to slip a little. I have yet to actually adjust the vacuum modulator and find the vacuum leak that prevents the car from shutting off. :mad:
It looks like my suspicions are comfirmed. My best guess is the PO burnt it up with a combo of constant, low cranking amps and voltage.
Time to look for a rebuilder.
Hello all
I usually roam around the ford idi forum but im hear to ask about a car that I'am set to buy.
the car is a 1976 mercedes diesel w115, pretty sure its a 4 cylinder. I was pretty stoked to go pick it up for $600 bucks
I'm not sure if its a 220 or a 240
...until i ran into...
As the title says, my auto hubs on the 94 are engaging randomly without the t-case in 2wd. I have noticed that the drivers side hub is making noise and is more likely to engage randomly, especially when turning left. Backing up does disengage the hubs until they decide to lock again.
At this...
I just received what i thought were the purolator oil filters i bought from an online vendor and they turned out to be Universal Cooperative oil filters with the purolator part number on the out side. the part number on the filter is FER288 or FL30288
I searched google and the forum and did not...
Shifts hanging up at 3/4ths to WOT....
I dont get it... :dunno
The '94 truck has been like this the day i bought it.
I just replaced the tach sensor and the TPS. It shifts much better now but i still have the shifts hanging up from 2nd to 3rd and 3rd to 4th. I can have it floored and it...
Mine has been going out slowly for quite awhile and i think it has now begun to affect the transmission, only on take off though because idle is the only rpm range that it has trouble picking up.
I have cleaned it before and it didn't seem to do much.
How do these tachometer sensors fail...
I just climbed the rockies with my 94 250 with a 2300lb cab over camper + or - 500lb to 800lb of ppl and gear, and went over a few passes as high if not higher than 10,000ft elevation and I've been struggling with my wafer temp, I saw 250 at the highest, I never ever let it get this high, it...
Well i belive that it is now time to replace my torque converter in my 94, especially due to the fact that i am going on a very long road trip soon. When traveling at 55mph i am seeing about 1900 rpm, when i turn on the hazard lights to unlock the converter it only changes by about 100 rpm.
:(
I...
Hey guys,
Its been a while since i posted last,
Right now i am in the process of getting my truck in ship shape for a 2000 mile road trip i will be taking with a 2600 lbs( wet weight) Cab over truck camper. My issue is that this camper is putting a strain on my rear leafs, which are packs of...
The truck that is idling fast is the '93 in my sig. This truck is actually my grandfathers, and he loaned it to my uncle for the time being. So the situation is i am the only one that EVER maintains this truckcookoo, i try to do what i can when its around( sometime i cant get my hands on it for...
Is it ok to use this clear tubing for my in-line trans filter? I didnt have the right size fuel line so i used this stuff that i bought not to long ago.:dunno
Rough torque converter lock up and delay
Ok, i did a search before i posted this and i got some what of an answer, but my search left me with some more questions.
When i accelerate in my '94 F-250 I can barely feel my torque converter lock up, but when i am driving and let off the throttle and...
I just recently did the manual glowplug mod on my 94 and my wait to start light comes on intermittently while i am driving. Any ideas why this could be happening? The volt meter does not show that the glow plugs are drawing current when this is happening. A few weeks ago i thought i was seeing...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.