Search results

  1. Kizer

    5.5 mm (.217 Inch) Bore Scope (to inspect timing gear alignment)?

    Hello Ladies, Gentlemen and F ***n' Robot, It's been a minute since I've had the IP (timing) gear cover off of one of our trucks. Do any of you, robot excluded, know if a bore scope (5.5 mm max diameter) will get me past the IP gear and the cover? I remember that the "putty knife/plumber's...
  2. Kizer

    Milwaukee Battery to Run IP / Wiring ?

    I found a 12v stepdown for 18v Milwaukee batteries (Link). The plan is to mount the stepdown in the cab, as backup power supply, to run the IP. I'm not sure how to wire it. My thought is that I'll need a diode (maybe 2?) and some kind of protection for the Milwaukee battery. Am I on the...
  3. Kizer

    Locking Hubs: Seeking Reviews

    What locking hubs (TTB) do y'all run? How long have you been using them? Do you "baby" your truck? Feeling interrogated yet? Welcome to my world.
  4. Kizer

    Seeking Advice/Reviews: TOB Brands

    Good Afternoon, I'm currently running the TOB from the LUK kit on my 350. As usual, it's "chirping" at me. I would not have used it, I was in a bind. Anyway, the plan was to order the Timken. Now, it looks like the Timken has a plastic sleeve too! Any advice and / or reviews, regarding the...
  5. Kizer

    Stumped: Glove Box Latch

    I broke the glove box latch on a bullnose...my winch remote is in there. What's the consensus regarding the best way to get it open with out tearing anything else up?
  6. Kizer

    ZF advice/help please

    I’m on round 3 of output shaft seal (rear seal) replacement. I broke the trans, replaced it with rebuilt transmission…seal leaked and I ASSumed that the seal leaked because I had stored the trans dry for a few years. Replaced the seal…still leaks…read the service manual. Assumed, again, that...
  7. Kizer

    Vacuum Pump

    My 5 day old NAPA vacuum pump: I found this company: https://www.accuratediesel.com/shop/29.html Any of y'all used them? Thank you, Kizer
  8. Kizer

    Acorn lug nuts for dually

    I had a hard time finding these so I thought it might be valuable information for some. Simulators are not my favorite option. I'd like to find chrome steel wheels ... no luck yet. https://www.ezaccessory.com/Duplex_XL_Acorn_Lug_Nuts_p/3110s.htm
  9. Kizer

    Conestoga Diesel (in PA) = Moose Diesel (in SC)?

    When I go to : http://www.conestogadiesel.com , and use the contact button, it takes me here: https://moosediesel.com/ Did I miss a lot? Kizer
  10. Kizer

    Cruise Control Cable Questions

    The cruise control cable went t/u on the IDIT (IP end disappeared). I seem to be getting conflicting info. on the correct part #. Some say w/ turbo, some n/a only and some sites have the same part number for the throttle cable & cruise cable?? All of them are discontinued but I'd like the part...
  11. Kizer

    TSB's ... where to pull from?

    Hello, Where are y'all pulling TSB's? I've found a few sites. None seem complete. Even the Ford site seems pretty worthless. They only list two "field service items" for the IDIT ... and I know that ain't right! Link: Owner.Ford.com Another wants $20.00 / month to look at them! Link...
  12. Kizer

    Advice: Tire valve extensions /TPMS/ Pressure EqualizersDRW

    Hello, I've read horror stories about chinesium "pressure equalizers" and valve extensions ... I'm not clear about where to find a quality product. E-trailer has some $$ options ... but I know it's chinesium. Additionally, I'd like TPMS on the rears ... read the same type of stories and have...
  13. Kizer

    3G Alternator Question

    Hello All, My 2nd replacement alternator (in two months) is "pushing" 12.4V after start up. After I reach 3000 (or so) RPM it charges at 14.2V until I shut the engine down. Upon start up it's back to 12.4V ... etc. What causes this problem? I'd like to understand the issue before I go back to...
  14. Kizer

    Voltage Regulator Going TU? Quick reply/opinion please.

    Hello All, Regarding the '93 IDIT: The factory volt meter is "wagging" at idle unless I put a load (head lights for example) on the charge system. Seems alright at 1500+ RPM. I don't have a voltmeter handy (last time that happens) because I'm on the road. Do you think I should stop at the...
  15. Kizer

    Your Favorite ISSPRO Dealer / Distributor?

    I'm looking for Pyro parts. I have an EV that I need the "driver" for. So far I've called Diesel Manor and Orange Co. Diesel ... emailed ISSPRO ... no reply. Thank you in advance, Kizer
  16. Kizer

    Considering 19.5" wheel - I'd like to hear your experience

    Hello All, I'm building a budget / plan for changing my final drive ratio ('93 DRW IDIT CC ZF5) and I'd appreciate, greatly, input from our members with experience running the 19.5" wheel / tire. My concerns are: (More) rigid ride Balancing. Effects on braking I'm also curious as to the...
  17. Kizer

    Your recommendations for throwout bearing ZF5 IDIT

    I've purchased a couple of LUK SMF conversions and I'm about to order another one. The look/feel of the TOB in the kit reminds me of something out of a gumball machine / Cracker Jack box. Have y'all had any issues with the TOB in the LUK kit? I haven't put many miles / hours on one yet. I...
  18. Kizer

    ZF, TOB or something else?

    Gentlemen, The latest addition to my remuda (no history but someone has pulled the tranny at least once) is "rattling" when I release the clutch ... only in reverse. I don't "feel" it in the pedal. I'm having trouble understanding what could make noise "only in reverse". Ideas? Thank you, Kizer
  19. Kizer

    NewB to OBS (IDIT) Questions: 1, or 2, of Many

    1: I'm experiencing what I believe to be "turbo surge". Symptom: When I come out of the throttle, at 2700+ rpm, the engine "surges" a couple of times before "evening out". I've had Bank's Gen 1 turbos, on 6.9 engines, and never experienced this. Question(s): What's going on (mechanically)...
  20. Kizer

    Experience with GV install anyone?

    Seriously considering GV for the '93 IDIT. I can't keep up (shake the idiot drivers) on the interstate ... constantly twisting 2800 - 3000 RPM, and tired of that. The question ... Has anyone had experience with the install process behind a ZF5? Do I have to get both drive shafts shortened? Thank...
  21. Kizer

    Am I the only one that has to tighten DP Clamp daily?

    Maybe daily is an exaggeration. I don't hear anyone else complaining about the down pipe clamp coming loose ALL THE DAMNED TIME ... This is my first factory turbo and the truck with which I've had this problem. What gives ... it's a real PITA. Any advise is greatly appreciated.
  22. Kizer

    Please school me on how to send PM

    I promise, I searched ... I don't get it. I've done it before ... can't seem to find the "button" now. Thank you, Kizer
  23. Kizer

    Several IDI's for sale - can deliver

    I'm moving soon. As a result I have to "thin the herd". I'll listen to reasonable offers if you think I'm off on the prices. I can deliver any of them. 1985 F250 6.9 4x4 T-19 Tan I bought the truck couple of years ago. I’ve never had it on the road. When I bought it, the PO had removed...
  24. Kizer

    2003 SuperCrew Lariat - about 176,000 - $3500 - can deliver for fee

    I need to shed some iron. Most of the trucks in my signature are going up for sale. First is my only gasser. I really like the truck but it needs to go. The Good: *Clear Blue Title in my name *Runs and Drives Perfectly- dealer maintained since 2003 - all records available **All factory...
  25. Kizer

    Another FSV Question ... I know. I feel stupid for asking

    The '93 IDIT, that I scored a couple of weeks ago, started "surging" at 1/8" tank yesterday (no big surprise). I switched to the front tank ... drove about 20 miles with no issue. 3hrs later, started the truck and drove about 7 miles before surging began again. The truck died and I couldn't...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

No members online now.
Total: 535 (members: 0, guests: 535)

Share this page

Top