Search results

  1. C

    Changing one head gasket, should I change the other side

    I have studs installed so its not bad. I torqued the heads down to 120 ft lbs per ARP specs. You guys are probably right, I will change the other side also. The engine is still in the truck so its a little pain in the ass to work on.
  2. C

    Changing one head gasket, should I change the other side

    Changing one head gasket, should I change the other side *UPDATE* Well im doing what I didnt expect to happen after only 3k miles after a rebuild. My passenger side head gasket developed a small leak towards the middle somewhere. Now since im changing the lifters and have it torn apart should...
  3. C

    ATF Added To Engine Oil...Why?

    So, still waiting on a answer on how much to add and do we just let the engine idle or do we drive it a while prior to changing the oil
  4. C

    Bronco idi MPG's?

    No body lift. I used a factory turbo kit and moved the engine forward 1 inch so I dont have any firewall issues withe downpipe. Im using a 3 inch downpipe and ive got plenty of clearance
  5. C

    Bronco idi MPG's?

    My bronco weights 7125 lbs . 1988 brick nose. Converted over to 7.3 turbo, e4od. 4.10 dana 60 front, 4.10 10.25 sterling rear, plus winch, custom real bumper, roof rack, rock guards, full tank of fuel, and me in it. I get bout 16 city. I hope to get more once I get my 35's, in keeping the rpms...
  6. C

    Aluminum injector caps

    Well that sums it up for me. Put me down for a set. I would need the kit for the turbo model. 3 port cap design. Thank you
  7. C

    Can someone please explain this oil pressure mystery I had?

    I have spent numerous hours on the net trying to find a distributor that has BB code injectors. Who is this person Russ I keep hearing about? Can someone direct me to BB injectors please?
  8. C

    Can someone please explain this oil pressure mystery I had?

    so what are the best injectors for the turbo motor?. G code or b codes. Ive been reading on the differences and from what I can see its the tips?
  9. C

    Can someone please explain this oil pressure mystery I had?

    Well let me start, after I finished my IDI install in my bronco, I added a factory turbo system. Then thinking I didn't upgrade my injectors after the turbo install, I purchased a set of rebuilds G code from Accurate Diesel to replace the B code injectors originally on the motor. Well right...
  10. C

    Help me find the article on storing a ip pump

    Thanks all, for your expert advise
  11. C

    Help me find the article on storing a ip pump

    Anyone got Any other ideas?
  12. C

    what is the ideal ip timing to have advanced or retarted (hahaha)

    hello all, what is the ideal ip timing to have, the factory mark, advanced (half the width of a nickle), or retarded (half the width of a nickle), i know the ideal timing is to set the timing with a meter, but i dont have one. Im trying to figure out why i cant get better fuel milage than...
  13. C

    Help me find the article on storing a ip pump

    thanks, I looked at the tech section and nothing ( thanks Icanfixall) , i remember reading somewhere that if you fill the pump with atf and seal the bag it will last for years in a bag.
  14. C

    Help me find the article on storing a ip pump

    Hello all! I have tried many searches and no luck. I remember seeing a article on storing a ip pump long term. Thanks in advance. Enzo
  15. C

    My light bulb burnt out, please help with my HydroBoost.

    well, i would like to thank everyone for their time trying to answer and knowledge. I fixed it, let me start by saying i sat in front of the bronco on a chair for an hour trying to think of what i did wrong. Then i realized i also installed a power steering cooler. So my problem is that i t-eed...
  16. C

    My light bulb burnt out, please help with my HydroBoost.

    Hello All, I want to thank everyone in advance for posting answers to my question. I have a 1988 Bronco w/7.3 IDI Turbo. I have converted over to hyrdoboost, I have used the hydroboost setup on the gas engine for 2 yrs before converting to diesel and no problems. Now when I finished the...
  17. C

    Anyone in Phx, Az area that can help me with my Diesel Bronco?

    thanks I will let you know regarding the timing tools in the near future. I will be installing a boost and pyro in a few days. waiting on the delivery of the guage pod.
  18. C

    Anyone in Phx, Az area that can help me with my Diesel Bronco?

    Hello All, I just finished my 7.3 IDI w, factory turbo and E4OD install in my '88 Brick Nose, no error codes on the tranny, so everything is connected just right. I would like to know if anyone here on the forums is in phx area and can set timing and fuel on this bad boy. im still learning a...
  19. C

    FORD Service manuals on dvd

    sure would love to have 1993 and 2002 manuals. Man can you imagine having info at your fingertips? WOW;Sweet
  20. C

    Lots of idi parts

    paypal sent for diesel instrument cluster
  21. C

    want to install a powerstroke alternator on my idi ???????????'s

    see even old dogs (like me) can still learn new things
  22. C

    want to install a powerstroke alternator on my idi ???????????'s

    many thanks dgr, your link set me straight, the powerstroke alt. is a 4g. now i got it. all i need to do is connect the GRN/RED to the GRN/RED wire on the harness and the ORG/BLU on the charging post. See thats why i ask the pro's. Merry Christmas
  23. C

    want to install a powerstroke alternator on my idi ???????????'s

    i looked at that link, but still confused what to do with powerstroke alt. with 2 wires, do i connect the org/blu to the charging post?
  24. C

    want to install a powerstroke alternator on my idi ???????????'s

    hello everyone, I need to install a alternator from a powerstroke 02 on my 93 idi, i already did the external regulator delete and would like to know about the wiring. MY powerstroke alt. has two wires on the plug and the 93 alt. has 3, the powerstroke alt. has green and red (simple to hook up)...
Top