Recent content by tknomaj

  1. T

    Remote mount filter..

    I lied it costs 102.99 WITH SHIPPING
  2. T

    Remote mount filter..

    ordered from summit found out about it because summit had a listing for it but had part number 3352 which is for 6.0 power stroke not 7.3 idi or 7.3 stroke so called hamburgers as they are local to me and told them the problem this was in July or early august called yesterday and they are...
  3. T

    Remote mount filter..

    hamburgers performance part #3360 phone number 562 921-0404 cost around 85.000
  4. T

    BLack Max Is ALIVE

    After having my first engine blow up due to a friends shop who cut holes in radiator support for Hyper Max Inter cooler they did not bolt down oil dip stick and lost all oil going down freeway in rain engine blew. Purchased ford complete reman with wiring and turbo . Been in and out of hospital...
  5. T

    Fuel Tank Design

    Mine are custom made by Aero Tanks 909 388-0002 about 44 gal and 183.00 plus shipping and optional skid plate. total on board fuel is 109 gal.
  6. T

    Does my truck have a residual valve for the rear brakes?

    Yes these trucks master do have them. Replace master with 4 wheel disc master. Disc brakes require the pull back of fluid to get full release of caliper piston. drums require constant residual pressure for the cylinder cups also get proper proporationing valve . if cannot find local abs brakes...
  7. T

    My New Intake Idea

    In side of fender between inner and outer fender but filter would have to face down. But this location also makes it vunerable to water intrusion
  8. T

    a few, hopefully last, random questons about this old truck

    find the center of the steering box. Turn all the way to the right and then at stopping point put your hand on steering wheel at 12 o clock and then turn allthe way back full lock to the left counting the turns. then turn back to the right 1/2 of total turns to the left and then check your how...
  9. T

    My New Intake Idea

    What if You pulled in cold air prior to compression in the turbo would not the pressurized air going into intercooler be lower in temp and have a larger temp drop? Hot air from under a hood does not HP make. Put a thermocouple where your filter will be located and drive your truck for one hour...
  10. T

    Aluminum Radiators On the Cheap...

  11. T

    Any of the turbo guys out there try one of these?

    afe dry
  12. T

    Aluminum Radiators On the Cheap...

    But Gary the alternative is one that is glued together;Really and they may come apart easier but never when I would want them to -cuss have worked with glued radiators before learned my lesson in MOAB LESSON LEARNED
  13. T

    Any of the turbo guys out there try one of these?

    Have one and LOVE it:love:will not use any other. the best IMHO But will not go to the other route due to underhood temps , would eliminate my Hypermax cold air, and the hassle of routing with intercooler piping. Plus My airbox is insulated in a blanket to help keep incoming air charge cold!!!!!
  14. T

    SUV to convert?

    Yes that was the rule but the rules have changed and engine SWAPS are now against the law!!! Engine replacement is legal within the given model and year. IE 1995 bronco 4.9, 5.0,5.8 is all that is legal with all proper emissions equipment for year and model for the engine. NO UP OR DOWN in years.
  15. T

    Dash questions

    I have one for my truck that is not installed as of yet if someone has the ability to reproduce them I will loan it out for a copy to be made for fellow members. ford part#f4tz-1504366-a complete with instructions
See more

Latest posts

Forum statistics

Threads
91,299
Posts
1,129,936
Members
24,109
Latest member
Lance

Members online

Total: 768 (members: 7, guests: 761)

Share this page

Top