Recent content by prerunnin

  1. P

    Slow to move fuel gauge?

    Normal, does the same thing on my 03. Do not cycle the key rapidly on these trucks though. Every time you cycle you cycle the glowplugs and the FICM diagnostics and you can burn out the FICM. Happened to me doing the same exact thing at a pump cost me a FICM and I had an injector fail 500 miles...
  2. P

    the money pit.... Another problem

    all of them were in bad condition, this one just gave first. anyways i'll snap a picture of the broken bracket tommorow
  3. P

    the money pit.... Another problem

    not that bracket, the passenger beam's bracket its very weak. the truck isnt beat either. i only put spicer u-joints after i broke 2 durashits and a napa on my prerunner. 3 u-joints in the front, 2 on front driveshaft and 3 on back driveshaft and the carrier bearing on the rear driveshaft...
  4. P

    the money pit.... Another problem

    the bracket that mounts the beam end to the crossmember under the engine, for the passenger beam
  5. P

    the money pit.... Another problem

    I'm about ready to sell this ford... WHEN DOES IT END! I bought the truck back on thanksgiving with plans to tow with it, first the radiator started leakin so i got a new one 300$, then the tie-rods had to be replaced 150$.. then my engine leaked real bad so I redid half the gaskets. then one...
  6. P

    E4OD took a s**t...

    i've been slackin on this pretty bad, just dropped the transmission case off to get hot tanked and im waiting on a trust washer kit before i put it all together. ended up going with a transgo tugger kit, kolene seals, spiral o/d snap ring, half billet torque convertor, transtec gaskets and...
  7. P

    E4OD took a s**t...

    Yes, and I didnt really see anything on what kit he was using... this is my shopping list as of now bushings http://www.makcotransmissionparts.com/36030E.html band http://www.makcotransmissionparts.com/B36022E.html clutches/seals http://www.makcotransmissionparts.com/36004EF.html shift...
  8. P

    E4OD took a s**t...

    I bought the truck from an older guy at 210k, he had it since new and was **** about most oil changes. he said he put the transmission cooler on the day he brought the truck home(the things half the size of the condenser) other than that i didnt talk to him about it much he just told me it was...
  9. P

    E4OD took a s**t...

    Well I drove it more, rule out electric problems speedo and tach work fine. The light stopped flashing and I still have no o/d, now im starting to think that a sprag stripped out or maybe clutches. Im going to order full rebuild kit and the transgo heavy hauler shift kit. Either way the...
  10. P

    E4OD took a s**t...

    So I was driving down the freeway(downhill)... cruising at about 65 mph, and i heard a pretty good clunk and my truck was in neutral. so i got over and start to pull over and it clunked again. now the o/d light started flashing. I pull over and check everything out fluid was good nothing leaking...
  11. P

    Building turbo IDI

    big hold on project trans just took a **** and i gotta by 2grand i shocks for my other truck :mad:
  12. P

    Building turbo IDI

    steering box/fuel tank/rear axle/front i beams are all out and in my shed. the plasma cutter took a **** so i havent got the motor out yet :(
  13. P

    Building turbo IDI

    well. after all day off trying to save the windshield and pull this thing out i ended up breaking the windshield and breaking the top half of the injection gear cover where the oil cap is. econolines are a pain in the ass, we got the transmission out and the motor half way out, transmission is...
  14. P

    Building turbo IDI

    Donor met sawzall today!
  15. P

    Building turbo IDI

    Donor met sawzall today!
See more

Latest posts

Forum statistics

Threads
91,306
Posts
1,130,030
Members
24,117
Latest member
olsen726

Members online

Total: 738 (members: 9, guests: 729)

Share this page

Top