Hi guys, Any idea what a good used Banks wastegated turbo kit is worth?
I blew a head gasket on my 1984 6.9l about 120 miles from home in the middle of the night, overheated her pretty good, got it cooled down and limped it w/ the radiator cap loose at 50mph the rest of the way home. Not...
Guys, I try not to bother yall with minor stuff, but I could use some input on a problem I'm having with my 6.9l. I started having an issue with it blowing coolant out of the radiator overflow tube. Aldo, the engine is not and has never overheated. I checked the radiator cap, it was rusty and...
I dyno'd my truck NA shortly after a complete 100% rebuild w/ the ZF 5-speed and 4.10's and it pulled 125hp/256tq at the rear wheels in 4th.
I had it dyno'd again after I put the Banks wastegated turbo setup on and had the pump turned all the way up w/ 3.73's and the same tranny and it pulled...
Ok, I understand that Banks turbo will be out of it's efficiency range above 12psi. Next question: from looking at the compound turbo kits on the market the larger remote mounted turbo feeds air back into the smaller turbo mounted on the manifold/turbo pedestal, etc. If the little turbo spools...
Be careful driving around w/o a bed or fenders! A rock slung out from between my duals and shattered my back window on the test drive w/ the new suspension!
Bowedup
That ones been on craigslist Houston for a month or so now, I think he's asking like $6500 on there. Nice project but good luck getting $6500 for it....
Bowedup
One more thing, this turbo is designed to put out around 20 psi and it is wastegated, comes off of a 7.2L engine w/a max rpm of around 2400. It is also a watercooled cartridge.
Bowedup
Ok, got my first look at the new turbo I mentioned near the top of this thread today. Size wise it is not too much larger diameter wise than my Banks turbo but the hot and cool housings are thicker in size.
Can anyone give me a crash course in how to read and interpret those A/R numbers on...
Razorback, even not finished that is definately one of the coolest projects I've seen anybody try on a 6.9L in a long time! I can't wait to hear how it runs once you get the new pump on it!
Somebody had mentionedcearlier that another guy has his turbo mounted under the truck like this...
I agree that is a cool turbo setup! That turbo makes the Banks Turbo look tiny! What would a turbo like that originally have came on? Judging by the pics it looks similar to what goes on a 3406?
Any idea how much boost it is putting out at full song on your IDI? My guess is our engines...
It looks like the turbo is on a bracket made of angle iron and plate. I'm sure the owner will chime in but my guess is the turbo is below the frame so he had room to connect the exhaust elbow pictured as well as the cool side tube going back up to the engine. I would imagine it would have been...
Jake S, thanks for you boost info! Is your ATS wastegated or nonwastegated? Do you tow much w/ your setup? What kind of egts do you see w/ 18psi of boost?
Bowedup
Man I would love to see some pictures of your turbo setup! Since you have run both the Banks and the S400 can you give us any feedback on power/driveability/etc comparing the two?
Bowedup
Boy thanksgiving is providing some darn good reading!
The spring you're talking about is under the top cover of the injector pump where the shutoff solenoid is mounted?
Bowedup
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.