WTB: rear return line manifold.

[IDIoit]

ive looked for them on e-bay, cant find jack!

i want to purchase these return line manifold so that i can upgrade them to 1/4" fittings. all the ones ive ran across are 3/16"

if you have one, id like to buy it!

thanks!

You must be registered for see images attach

 

[cpdenton]

All right. Following up on your other posts about return lines.

That style there doesn't come in the 1/4 inch style if I remember right. Only the 7.3 return lines have th 1/4 inch.

I have a 7.3 style somewhere in the shed. I will go try to find it and post up a picture.

I may be wrong here, if I am, someone correct me.

 

[IDIoit]

i made these 1/4"

You must be registered for see images attach

gonna do the same if i can get more...

 

[cpdenton]

There is a restriction in the factory piece too. A small orifice, but I am not sure how big?

 

[laserjock]

I don't think either of my motors had that fitting....Is that the connection to the fuel return to the tank?

 

[IDIoit]

I don't think either of my motors had that fitting....Is that the connection to the fuel return to the tank?

yes sir.

CP i looked at the other thread, did you post a pic?

 

[cpdenton]

Posted it up now.

Here too.

You must be registered for see images attach

 

[towcat]

ive looked for them on e-bay, cant find jack!

i want to purchase these return line manifold so that i can upgrade them to 1/4" fittings. all the ones ive ran across are 3/16"

if you have one, id like to buy it!

thanks!

i have a workaround that problem if you are interested. can post pics later on tonite.

 

[IDIoit]

i have this set up on mine. worrks just fine after the 1/4" revamp i did, just looking to gain knowledge, and maybe supply other ppl that wanted this with a 1/4" option vs the 3/16.
now i see there are other ways around this.

 

[typ4]

I have a couple of new ones.

 

[IDIoit]

I have a couple of new ones.

where did you get them?