wtb: dana 50 pumpkin

[hce]

Any one want to part with Dana 50 ttb pumpkin with 3.54. Must have original dana/spicer gears, and willing to ship.

You must be registered for see images attach

 

[IDIoit]

not anytime soon, but I will have one w/ 4:10's in the future

 

[riotwarrior]

Any one want to part with Dana 50 ttb pumpkin with 3.54. Must have original dana/spicer gears, and willing to ship.

You must be registered for see images attach

are u wanting 1 or selling 1

I likely have said unit in stock if needed

 

[hce]

Wanting one, but it has to have factory 3.55 gears.

 

[FarmerFrank]

I think I got 2. Might be 44HD's. What are you willing to pay with shipping?


Sent from my iPhone using Tapatalk

 

[hce]

Not sure how to answer the shipping, without a price the pumpkin. I'm guessing shipping around $80 dollars. I could even send a call tag. Before anything though take a picture of the ring gear it should have a spot with ratio and size.

 

[leojr]

I have a factory '96 D50 pumpkin with 3.54 gears but am in Texas...

 

[jwalterus]

I've got a '94 that I'll have the techs at work tearing out of a broken plow truck Mon, I could bring it so far as Williston and ship it from there or meet you since I'm out every week.....

 

[hce]

I've got a '94 that I'll have the techs at work tearing out of a broken plow truck Mon, I could bring it so far as Williston and ship it from there or meet you since I'm out every week.....

I may have to take you up on this.

 

[jwalterus]

I'll let you know what the gears look like, should be fine from what happened

 

[compressionignitionrules]

I had 2 of these diffs , one from an 84 and one from a 91. only pieces I ever sold was the L side TTB beam and the hubs/rotors.
rest went on a load . what happened to yours? ran out of oil. they are pretty tough other than beam breakage from pounding the weight of a plow and bottoming it out constantly .

 

[hce]

I had 2 of these diffs , one from an 84 and one from a 91. only pieces I ever sold was the L side TTB beam and the hubs/rotors.
rest went on a load . what happened to yours? ran out of oil. they are pretty tough other than beam breakage from pounding the weight of a plow and bottoming it out constantly .

Broke the input shaft, hence why I will preach about using proper electronics with a gear vendors, replaced ring and pinion with a yukon as I could not find a spicer set at the time. Since the forced rebuilt of the front end have been fitting front driveshaft vibration. Have it narrowed down to the front yoke or the pinion not locating the yoke accurately.

 

[riotwarrior]

Wanting one, but it has to have factory 3.55 gears.

Like I said...think might have 1...but if selling I wouldnt need 1 ...but wanting...will check soon