Turbo intake part?

[Ratat98]

I've searched the web high and low the past couple of days and hopefully I'm just an idiot and this is a simple answer..
I have a 7.3idi with the turbo and I need the rubber part between the air box and the turbocharger. I dont know if it's called a hose, boot, whatever, but I can't find one anywhere. Can someone help me figure this out?
Thanks in advance!

 

[Macrobb]

What turbo kit do you have? Is it a factory turbo(says "ford" on the air box), ATS, Hypermax, or Banks? The last three have multiple variations as well...

A lot of different turbos were used over the years by various people.

Probably the best thing to do is measure the diameter of the rubber coupler, then go on Ebay and find a silicone coupler the same diameter. You can find pretty much any size you need; silicone hose is used for turbo intake couplers and boots pretty much universally.

 

[Garbage_Mechan]

It would help a lot to know what turbo system it has. Is it a 93 or 94 with factory installed turbo? Or an aftermarket Banks, ATS or Hypermax?

 

[Garbage_Mechan]

Guess we were thinking and typing the same thing there Mac.

 

[Ratat98]

What turbo kit do you have? Is it a factory turbo(says "ford" on the air box), ATS, Hypermax, or Banks? The last three have multiple variations as well...

A lot of different turbos were used over the years by various people.

Probably the best thing to do is measure the diameter of the rubber coupler, then go on Ebay and find a silicone coupler the same diameter. You can find pretty much any size you need; silicone hose is used for turbo intake couplers and boots pretty much universally.

It's an ATS kit with a garret turbocharger

 

[Macrobb]

It's an ATS kit with a garret turbocharger

ATS made three different kits over the years. an 085, 088 and 093. If you google for pictures you can figure out which you have.

 

[typ4]

Ratat

I have those in stock. PM me for details.