IDI_Journeyman
Full Access Member
What's up guys, I got a 1985 F250 with a 7.3 IDI ats turbo with a ZF5. My DMF and TOB are making a lot of racket and my clutch is starting to slip so I figured it's time to replace it.
I bought a Exedy clutch kit from Rock auto with a single mass flywheel. Iv pulled a ZF5 before but not on a turbo idi. iv been hung up on something. I have 1 bell housing bolt that I can't pull because of the down pipe for the turbo is too close. And one top bell housing bolt that the actual turbo is blocking. How hard is it to remove the turbo? Iv never taken a turbo off before and I want to make sure I do it right. Any tips or help is appreciated. This website is truly a blessing
I bought a Exedy clutch kit from Rock auto with a single mass flywheel. Iv pulled a ZF5 before but not on a turbo idi. iv been hung up on something. I have 1 bell housing bolt that I can't pull because of the down pipe for the turbo is too close. And one top bell housing bolt that the actual turbo is blocking. How hard is it to remove the turbo? Iv never taken a turbo off before and I want to make sure I do it right. Any tips or help is appreciated. This website is truly a blessing