Trans and engine swap help

[Thewespaul]

I’ll grab some pics when I get back to the shop, and no shipping is on your dime. The assembly was removed because the owner wanted a easier pedal to push down in traffic and because it had a hot spot that made it a pain backing trailers up a hill. I’d either clean it up with a DA or just have it resurfaced, I’ll sell you just the clutch if you want to go new on the flywheel.

 

[Thewespaul]

Well I was completely wrong, this is just a vanilla luk smf clutch kit, nothin special so dunno why I’ve kept it around. I’ll take $175 plus shipping if you want it.

You must be registered for see images attach

 

[Glsawyer]

can u find out the shipping cost?
i know i found that one for 266 free shiping

 

[Thewespaul]

pm me your zip and I get you a quote

 

[chrlsful]

"...So i am doing a weird swap..... 5.4 to 7.3idi. With a zf6...."
will a gasser tranny do OK in a diesel? (tq difference)

Probably, (due to THAT transmish) but it's got this non-mechanic head scratchin.........

Thnx !

 

[Thewespaul]

A 460 trans will live fine behind an idi but as mentioned before a small block bell housing can’t be made to fit an idi

 

[Glsawyer]

i posted my zf6 for 1200. t-case for 400 and motor 500

 

[Glsawyer]

i have a lead on a zf6 form a 6.0 but its just the front case.

can i swap the diesel fron half onto my trans and use my tail and internals?

 

[79jasper]

The 6.0 case still won't mate to a 7.3.....

Sent from my SM-G892A using Tapatalk

 

[Glsawyer]

what about the 7.3 case. like from a 2000?

 

[79jasper]

Nope. Not a direct bolt up, but can be made to work. I forget what all has to be done.
But if staying with the zf6 idea, that one would be the one you want.

Sent from my SM-G892A using Tapatalk

 

[Glsawyer]

ok. so wat about just swaping cases? would that work?

i hear it is very east on the zf6

 

[Glsawyer]

removing motor tomorrow. cab is off

 

[79jasper]

Might work. Go to Midwest trans website and compare part numbers between the 6.0 and 7.3 zf6.
See of the shafts and stuff are the same.

Sent from my SM-G892A using Tapatalk

 

[Glsawyer]

Torn apart

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach