Diesel JD
Full Access Member
I bought the universal senders from JC Whitney. I was only everable to see Fellro's pictures(sort of) and would just like either a link to the full writeup or some advice from either him or MNR. Mainly
1) What wiring in the tank/sender needs to be changed? I also don't see where these things even plug into an electronic system. It looks like it has just 1 wire and no place to go with it.
2) Do you have to drill a new hole? Obviously it will not fit in the stock sender hole, not even close, and it has no locking ring that came with it.
3) Adjusting the float arm: do you just follow Sunpro's instructions? Or something else.
Thanks,
JD
1) What wiring in the tank/sender needs to be changed? I also don't see where these things even plug into an electronic system. It looks like it has just 1 wire and no place to go with it.
2) Do you have to drill a new hole? Obviously it will not fit in the stock sender hole, not even close, and it has no locking ring that came with it.
3) Adjusting the float arm: do you just follow Sunpro's instructions? Or something else.
Thanks,
JD