stuff for sell

[greg_a_morton]

Guys I have to sell some stuff to keep working on my mercury. All will include shipping unless stated otherwise. Since I need a few things for my truck I might trade for things I need. I need to buy a new gear reduction starter and a set of injectors. I need a transmission dip stick that will work with my ats kit for a c6. I may need a few other things that I will stat later. Here we go!

You must be registered for see images attach

Core injectors 2 sets of BB and one set of B $15 for the Bs and $40 for the BBs

You must be registered for see images attach

1994 factory ats turbo hat. $30 HAT IS SOLD

You must be registered for see images attach

light Flywheel and adapter to mount e40d to idi. $100 flywheel is sold

You must be registered for see images attach

good takeout e40d been sitting in shop a few years. suppose to be a 1997 model with all the good upgrades done to it. $400 pickup only

You must be registered for see images attach

fuel filter housing with good paint and filter. $30 FILTER IS SOLD

You must be registered for see images attach

two 6bt harmonic balancers different sizes. $50 for both

You must be registered for see images attach

good looking egt gauge and probe wire. never worked in my truck but I think the probe was damaged when installed. $30

You must be registered for see images attach

A very nice 5" rolled edge exhaust tip for 4" pipe. $35 SOLD

You must be registered for see images attach

well this is my last item. This is a factory 4bt with th475 automatic transmission with a gear vendors overdrive. I had a fuel pin problem and that is the only problem with this setup. It needs something simple every one tells me but I have spent to much on this setup to go any further. I have over $7500 in this setup. The engine has about 70lbs oil pressure at startup and around 30lbs after warmed up. The engine is fairly stock except with the 35hp lennys fuel pin. It has a 5.9 manifold that has been cut down to make the turbo fit up high and work in a 67-79 ford truck. I will include all parts that I have extra cummins wise if someone does buy this. I will also include the $400 dollar heavy duty driveshaft that will work in one of these fords or long bed trucks. Any questions just ask and I will try to answer to the best I can. $4500

 

[gnathv]

Intake Hat

I just sent you a PM.

 

[greg_a_morton]

ats turbo hat is sold. Thanks gnathv

 

[itsacrazyasian]

That banks turbo looks like its for an IDI? Do you have the up pipes for it?

What gear reduction starter do you need? One for a cummins for a ford idi?

edit i see you're trying to stuff a ford idi in there now. I have a "new" reman mitsubishi gear reduction starter at the shop. I bought it when i did my swap but my parts truck has a denso in it and it made it much easier to install.

 

[wbw189]

Greg,

You have a PM.

Thanks, Ben

 

[greg_a_morton]

itsacrazyasian it is for the idi. I have just whats in the pic. This was going to be used on a 67-72 ford truck and my friend bought off of the internet a few years ago. The price is about what I have seen some of these go for but my downpipe and pedestal is ceramic coated! If you have this kit and need extra parts or want to build the parts this would be a good starting point. I used the ats kit on my mercury and it fits my truck better than this kit because of the up pipes coming up the passenger side of the truck. If my 4bt sells I will keep this kit and will build custom pipes to work on a 6.9 in a ratrod.

 

[greg_a_morton]

wbw189 you have a pm!

 

[greg_a_morton]

filter housing is sold. Thanks wbw189

 

[wbw189]

Thank you

Thank you, Greg.

Have fun on the Mercury! I love to see the unique trucks on this site.

Best wishes,

Ben

 

[greg_a_morton]

make offers on something if you think I am to high. I know times are tuff.

 

[greg_a_morton]

5" tip is sold!

 

[riotwarrior]

What size is the Pyro 2 1/8" or 2 5/16"

 

[greg_a_morton]

I will have to check on that tomorrow for you sir. I know it is a large gauge.

 

[greg_a_morton]

hey riotwarrior the pyro is 3.25"

 

[greg_a_morton]

flywheel is sold!