Rocker Arm Identification

[5 oclock]

20210717_154503.mp4

MP4 File

1drv.ms

Is this too much?

 

[IDIBRONCO]

I would say that it depends. Is there tension on the rocker arm? Is the valve being pushed open even a little bit? If the answer is yes, then it's too much play.

 

[5 oclock]

There is tension on the rocker arm. Not sure about valve being pushed open?

 

[riphip]

Turn the crank & it should tighten the gap. 20# torque is essential. The lifters are hydraulic. If the rockers are not torqued, they will come loose during engine operation.