Rear axle hub trouble

[Colin Mccormick]

I have a 1993 f350 with a 7.3idi and a sterling 10.25 rear end I'm having trouble with installing new hub seals in them. And it looks like i have 2 different hubs and the cr scotseal plus xl looks like it could fit nice in the right one and it goes in a little in the left one and i cannot get the scotseal classic in the left one and the classic just falls in the right one and i could bang it in just a bit

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[riotwarrior]

Between numerous calls n pics we figured his hub is dickered ...something ground and ate away at that one side something fierce

 

[IDIBRONCO]

It sure does look like it.

 

[lotzagoodstuff]

Might be time to look for another complete rear axle. Good news is they aren't that hard to find and generally don't command very much money down here in the states.

 

[TahoeTom]

My parking brake lever arm was stuck against my hub and machined the end off like yours. One of many things I had to correct after my purchase.

 

[u2slow]

Might be time to look for another complete rear axle. Good news is they aren't that hard to find and generally don't command very much money down here in the states.

Cheap in Canada too. $200 is asking too much; so I hang onto mine just in case.