Oil feed line?

[plowboy444]

So I've slowly been gathering parts for my turbo install, and one of the things I need is an oil feed line. I was looking at the ATS aftermarket kit instructions, and I see that they rout the line from the plug in the block, but doesn't the stock turbo tee off the oil sender unit? Is one way better than the other?

Thanks.

 

[86F2506.9]

i have mine t'ing off from the oil sending unit, shorter line= just a lil cheaper also

 

[phazertwo]

I did mine from the galley plug like ATS. The line was like $40 made from braided SS at the Parker store.

I made mine out of AN4 line, but I think I am going to upgrade it to AN5 to get a little more oil to the turbo! I will also add a oil pressure gauge reading from the turbo at the same time.

PZ

 

[typ4]

You dont really need any bigger than the -4, the hole in the turbo at the bushings is very small.