Mackdog
Registered User
Hello everyone, I'm new to this forum. Don't really have a serious question right now, but I wanted to introduce myself. Have been posting at FTE for some years but decide to come over here because it looks like you have a better forum for IDI trucks. I have a 1992 F 250 XLT 4x4 7.3 na with 5 spd manual and what I think is a 4 inch tough country lift. Its two tone brown and has BF 33 inch tires. I'm actually in the process of fixing the front end on the drivers side. It started out as an attempt to remove and replace the camber bushing on the drivers side but turned into replacing both the ball joints and the u joint for the 4x4 axle. I didnt think about it when I started but I should have had the alignment shop check the alignment and tell me how far off the camber and alignment was. It's a complicated story so I'll get into more detail with all of that later on....but anyways...happy to be part of oilburners
Eric
Eric