It'a Always Something With These Old Trucks...

[HammerDown]

S.O.A.B for the second time, the right turn signal 'hold' clip broke...and of course that little piece only comes with the wire harness running down the steering column $$$$$$$$$

 

[73idi88f350]

S.O.A.B for the second time, the right turn signal 'hold' clip broke...and of course that little piece only comes with the wire harness running down the steering column $$$$$$$$$

un pin the plug send wires up and then re pin plug once wires are feed back threw did it on a bronco about a month ago

 

[HammerDown]

un pin the plug send wires up and then re pin plug once wires are feed back threw did it on a bronco about a month ago

I know how the repair is done, as I did it before
What sucks is, I can't purchase just the white plastic turn signal disk, but the have to buy whole stinking 'costly' wire pigtail.

 

[Mulochico]

On mine the white plastic piece is for sale thru Rock Auto and A/Z.

 

[HammerDown]

On mine the white plastic piece is for sale thru Rock Auto and A/Z.

No f'ing way, that would be GREAT...do you have a part number???
Some 10 years ago I remember being forced to pay Ford almost $100 because I had to buy the whole stinking wire pigtail...and unpin-repin each stinking wire end.
All that $$$ just to get the turn signal disk.

 

[HammerDown]

I didn't think just the white plastic disk was available.
Cheaper than the Ford, but still way more then what is needed.
http://cgi.ebay.com/ws/eBayISAPI.dl...akeTrack=true&ssPageName=VIP:watchlink:top:en

http://www.am-autoparts.com/Ford/F250-Truck/turn-signal-lever/AM-16337323/435933.html

 

[towcat]

http://www.shee-mar.com/PDF/2011 catalog.pdf

see page 15.
pretty pics of the cancel cam part itself is on page 33
hope this helps.

 

[freebird01]

ill look tomorrow....i just tore one apart and i may have that piece...

 

[ToughOldFord]

Beats the crap out of monthly car payments on a vehicle while it depreciates in value.

 

[Mulochico]

No f'ing way, that would be GREAT...do you have a part number???
Some 10 years ago I remember being forced to pay Ford almost $100 because I had to buy the whole stinking wire pigtail...and unpin-repin each stinking wire end.
All that $$$ just to get the turn signal disk.

Check this out: http://www.autozone.com/autozone/pa...yKeyWord=turn+signal+switch&fromString=search

It is 1 of the bottom 2 items depending if you have tilt or not.

 

[opusd2]

Well thank you as well! I thought I saw them there, just never paid any attention to it since I've putting out bigger fires.

But it's what I need as well.

With a turn signal on for miles, I was starting to feel like a "Q-Tip", Snowbird" or whatever you call them

 

[HammerDown]

Beats the crap out of monthly car payments on a vehicle while it depreciates in value.

Well, yes, no and maybe...at 56, sometimes my time is more valuable then fixing broking sh*t on an old truck.

BTW...to the fellas that dug out those "turn signal cam links" > > > THANK YOU!

 

[ToughOldFord]

Well, yes, no and maybe...at 56, sometimes my time is more valuable then fixing broking sh*t on an old truck.

BTW...to the fellas that dug out those "turn signal cam links" > > > THANK YOU!

Trust me, I know how valuable time is, I don't waste it because there is not enough in a day. But flushing money into a dark hole of payments is lost time too. Money is time just as much as time is money.

 

[reklund]

I hear you. Found both outer tie rod ends shot doing a tire rotation yesterday. They were fine less than 2000 miles ago.
At least they're cheap...

 

[HammerDown]

I hear you. Found both outer tie rod ends shot doing a tire rotation yesterday. They were fine less than 2000 miles ago.
At least they're cheap...

Many years ago I learned to use Moog...lifetime warranty.