Finished my York pump and AC mount!

[alienturtle]

here is my york pump and stock ford AC pump mounted back up. i had a v belt groove on my fan pully so i used that to run the ac and york pump. solid as a rock and the belt adjustment works great. just need to plum it and have ac lines made. I need to get some pics of it mounted and painted. i had to take it off to get it ready for paint. take a look.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[h2odrx]

looks good 2 times the air!

 

[The Warden]

How adaptable would that setup be to an IDI block?

I want onboard air like nobody's business, but can't live without my a/c

 

[alienturtle]

im not sure how it would work on an idi block. the cummins block is of total different shape. it would just be a matter of designing a brackat with the same sort of setup. ill get some pics tonight when i get it all painted and mounted up.

 

[LCAM-01XA]

Can't do the same arrangement with an IDI, we have the PS pump under the A/C compressor. There is however enough space to squeeze the your next to the A/C compressor and above the pump, Heath posted pics and drawings with measurements of his setup not too long ago... And that reminds me I still have to swap my 115psi blow-off valve for the 150psi one, maybe tomorrow I'll do it if it don't rain.