95 psd temperture gauge probe install ??

[7.3 powerstrok]

95 psd engine coolant temperture gauge probe install ??

install at t-stat housing

 

[Mike]

Are you talking EGT probe?

 

[7.3 powerstrok]

engine coolant temp gauge mechanical gauge ,mounted in cab

 

[7.3 powerstrok]

ok just below the thermostat ...yes there is a 3/8 pipe plug remove the pipe plug and install the probe fitting ,,you may need a extender fitting depending on the probe or THERMOCOUPLING..,,you will also see the factory sending unit just to the left of the t-stat housing ,

 

[lindstromjd]

ok just below the thermostat ...yes there is a 3/8 pipe plug remove the pipe plug and install the probe fitting ,,you may need a extender fitting depending on the probe or THERMOCOUPLING..,,you will also see the factory sending unit just to the left of the t-stat housing ,

That's where mine is.

 

[DieselManor]

You can find a good picture here:
http://www.dieselmanor.com/diy/Ford_water73.htm