@Thewespaul
Those two prongs were checked yesterday. First the connectors were pulled and checked for power with the key in the run position. Both checked at 9 volts+/-. (test setup was sloppy so may have lost some voltage in test)
Then a hot wire from a battery source (the jump start connections) to each of the spades on top of the IP.
An internal click was heard on both.
I just set up to do a flow test out the Schrader. Will come back in and report quantity.
Edit: I'm back. At least 2/3 cup with the filter return flowing also. That's 10 seconds.
Those two prongs were checked yesterday. First the connectors were pulled and checked for power with the key in the run position. Both checked at 9 volts+/-. (test setup was sloppy so may have lost some voltage in test)
Then a hot wire from a battery source (the jump start connections) to each of the spades on top of the IP.
An internal click was heard on both.
I just set up to do a flow test out the Schrader. Will come back in and report quantity.
Edit: I'm back. At least 2/3 cup with the filter return flowing also. That's 10 seconds.