ran all new brake lines front to back and started to run fuel lines, crossmember is done and lines run on it
You must be registered for see images attach
made a mount to hold the throttle cable so it would work with the 79 pedal, not happy with my cable stops so will find some better ones soon
You must be registered for see images attach
next up was making the 90s dsl rad fit in to the 79 clip. the rad is almost 4inches wider and like 8inches taller so was going to be a tight fit. first cut the rad support out and welding in some new steel for the rad to bolt too. also reinforced the one edge with some round stock
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images
now the next big problem is with the rad being so big and the 79s frame being so narrow i had to notch the frame so the rad could sit inside the frame rails
You must be registered for see images attach
welded a plate on the outside by the spring hanger to add some strenght back in and boxed the frame in as well
You must be registered for see images attach
to add some more i welded a tube inbetween the frame on the plate i added above the spring hanger
You must be registered for see images attach
bolted the front clip back on the cab and put the rad back in
You must be registered for see images attach
is a very tight fit between the rad and the steering box but fits
You must be registered for see images attach
to make the rad fit into the clip i had to cut the body mount off ass they bolted down to the top of the frame. i needed to make new mounts on the out side fo the frame to hold the clip now
You must be registered for see images attach
You must be registered for see images attach
pulled the clip back off so i could weld up the new mounts
You must be registered for see images attach
You must be registered for see images attach
and mounts on the clip
You must be registered for see images attach
thats if for right now, have to pick up some new mounts then can put the front clip back on for the last time