chrisk1500
Full Access Member
- Joined
- May 7, 2007
- Posts
- 81
- Reaction score
- 0
Your code 13 is from the ESO.
It is a serviceable item on the IP. It is a tall silver cylinder with a wire pigtail coming off of it. Dave is getting a little confused here between the fuel solenoid and the shut off solenoid.
When the engine stalls, disconnect the ESO wiring harness and make sure that there is a 12v signal coming from the engine harness to the ESO. If the signal is not present, there is a wiring issue, if the 12v is present then you need a new ESO. They are easily replaced....like a 5 minute job!
It is a serviceable item on the IP. It is a tall silver cylinder with a wire pigtail coming off of it. Dave is getting a little confused here between the fuel solenoid and the shut off solenoid.
When the engine stalls, disconnect the ESO wiring harness and make sure that there is a 12v signal coming from the engine harness to the ESO. If the signal is not present, there is a wiring issue, if the 12v is present then you need a new ESO. They are easily replaced....like a 5 minute job!