Search results

  1. fx4wannabe

    Relocating Washer and Coolant resivoir

    Has anyone tried relocating to run a PSD intake box? I like the fact that it's behind the battery and out of the way. I would assume that the intake would bolt right in and would just need to fab up the connection to the turbo. Thoughts?
  2. fx4wannabe

    Where to buy air filter

    Where are ya'll finding air filters for the factory turbo air box? None of the local parts stores have a clue what I am talking about and keep trying to give me a PSD filter or an N/A filter.
  3. fx4wannabe

    Shocks on a lifted F350

    Well I finally got some different tires and an alignment done so the truck is driving strait down the road for a change. Ever since I bought it it has bounced really bad. Part of it was the tires but even after the new tires it still does it more than I would like. I have 6" rough country...
  4. fx4wannabe

    Engine storage

    I am looking for a stand that's on wheels to mount my spare engine on. Right now it's sitting on jack stands and blocks in the middle of my shop and i really need to be able to move it around. All the ones I have found list that they fit specific engines. Just need something simple that will...
  5. fx4wannabe

    Cruise Control issue

    i've had an issue with my cruise for a while. It comes on and it sets. As soon as it tries to accelerate itself to maintain speed it kicks out. I got to thinking is it possible that a sticky throttle cable would do this or is it a problem with the actuator?
  6. fx4wannabe

    Radio resets while cranking

    Ok I have kind of an annoying situation. Every time I start the truck cold all my radio presets get erased. After it warms up it's fine. I assume it's because of the large current draw on cold start but the radio shouldn't need that much to keep its presets. Is this common or do you think...
  7. fx4wannabe

    Facet Pump and filter relocation

    I have been tossing this idea around for a while and want some feedback. I'm going to put a Facet lift pump on the truck as one of my next projects and while I was at it was going to relocate the fuel filter and water sep. My main purpose for moving the filter is so I can fab up a new intake...
  8. fx4wannabe

    Oil Pressure Question

    Well I drove the truck to work a couple days ago for the first time in 2 years. Except for running a little hot all was good until on the way home I started losing oil pressure. Ever since I bought it has only had about 10 psi once it warms up but it usually has 40psi cold. Coming home it...
  9. fx4wannabe

    Looking for some 16.5" wheels

    Well I scored some military 37's so I am looking for some 16.5" rims. Seems they have gotten scarce. Want some that are polished aluminum or maybe even machined aluminum. Ya'll got any sources?
  10. fx4wannabe

    Looking for some lift blocks

    I am hunting some 4" lift blocks with a 4 degree taper. I can find 4" blocks all day but most have 2.6 degree taper. Y'all have any suggestions or have some laying around?
  11. fx4wannabe

    Pics of my ride

    One of the members was asking me to put a couple bigger pics of my truck. Here are a couple don't really have any good ones but I will when she gets out of the garage. Been over a year since she's seen the light of day.
  12. fx4wannabe

    DB Electrical starter problems

    I am about to call them and ream them a new one. Ordered a new starter get it everything looks great. Go to change it this morning. Took me 3 hours to get the old one out, not their problem. Finally get it out and go to put the new one in and it don't fit. Where it goes in the bell housing...
  13. fx4wannabe

    Rear Shackle Flip Question

    Finally getting the suspension on my rig ironed out. I scored a 6" lift off an F250 and got the leafs in the front and all is good there. In the rear it had stacked blocks which I am not real wild about so I am going to do a shackle flip in the back. Pretty set on the one from Sky...
  14. fx4wannabe

    Making progress on the truck need advice on brake lines

    Well today I got the springs in and the steering hooked up. Next is putting on the extended brake lines. What is the best way to go about it? Wasn't sure if I should do them one at a time and bleed as I go or just change them all at once. My brake fluid is nasty so going to change it while...
  15. fx4wannabe

    Installing premium warn hubs on a 94 F350 need help

    Ok so I am trying to figure out how to put these hubs in and I know the basics but there is a large black rubber oring and some kind of multi layer metal ring that I am not sure what they are for. I read the instructions but they may as well be in greek and so far I haven't found anything...
  16. fx4wannabe

    Lifting truck need some help

    Finally getting around to putting the 6" lift on the F350. I am trying to figure out the sway bar. So far I haven't found end links specifically for a 94 F350 and 2 of the places I checked with said its not recommended to put longer end links on an F350. So to those with a 6" lift on an OBS...
  17. fx4wannabe

    Lower ball joint 2wd F350

    I have a pair(2) of lower ball joints for 2wd F350's. Fits 92-97 for sure and may fit others. They are Motorcraft PN 104138. I will take $50+shipping for the pair.
  18. fx4wannabe

    7.3 IDI Turbo complete engine

    I have a complete engine out of a 93 or 94 ford truck. It is a 7.3L IDI Factory turbo motor. Has flywheel for manual tranny. It is missing the turbo, IP, Injectors, and hard lines but otherwise complete. It is supposed to run but I have never heard it run. Unsure of mileage. I bought it to...
  19. fx4wannabe

    Question about a potential waste oil source

    i got a buddy that is a forklift mechanic that I can get about 100 gallons from a month. Its a mix of hydraulic oil and motor oil. Anything that is found in a fork truck. The thing that has me a little concerned is he says from time to time there is coolant in there. I would think getting...
  20. fx4wannabe

    Front end rebuild

    Hey guys getting ready to rebuild the whole front end of my truck and I am trying to decide on what brand of parts to go with. I'm doing ball joints, tie rods, bearings, bushings you name it. I already have a Poly leaf spring bushing kit but still looking for the rest. I was leaning toward...
  21. fx4wannabe

    Can bad timing cause starting problems?

    Title pretty much sums it up. I have been fighting starting problems since I changed the pump and injectors. If I have a fuel/air leak I can't find it. Truck is hard to start after it sits a bit and I wondered if retarded timing would affect this.
  22. fx4wannabe

    Very low boost and an oil leak

    Well I went out and tinkered with the truck some and finally got the boost gauge hooked up. Think I figure out why my truck feels like such a dog I ain't getting hardly any boost. When I drive it like normal with light acceleration shifting at 2300 the needle stays on zero and never moves...
  23. fx4wannabe

    Looking for new door panels

    I am trying to find new door panels for my truck. I can find them for 91 and older all day long but none for 92-97. Mine are all faded and broken. If anyone knows where I can get some let me know. I am not against used ones either as long as they are like new condition.
  24. fx4wannabe

    Need some body work advice

    Over the winter I hit a deer with my ranger and it caved in the core support on the drivers side. I bought a new core support for it but after seeing how much work it will take to change it I think I am going to try and straighten the bent one. Need some advice on how to go about doing it...
  25. fx4wannabe

    Looking for a gauge pod

    I am looking for a triple gauge pod for the a pillar. If someone has one laying around let me know what ya want for it.

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,796
Members
24,099
Latest member
IDIBronco86

Members online

Total: 584 (members: 2, guests: 582)

Share this page

Top