Fuel Pump Block Off Plate

harrietnorth · Apr 14, 2020

You must be registered for see images attach

Deleting the stock fuel pump, this is the block off plate that the googler spit out.

Does this get the job done or are there other recommendations out there?

Spectre Performance 42473 Fuel Pump Block-Off Plate with Bolts for Big Block Chevy https://www.amazon.com/dp/B000BPZ42S/ref=cm_sw_r_cp_api_i_usHLEbMA297HK

frankenwrench · Apr 14, 2020

I believe so. Don't remember part number off hand, but I grabbed one off the performance wall of orily for a chebby to do mine. Looked like that one. Someone will correct me if I'm incorrect on that being the correct part number

SkipBurney · Apr 14, 2020

It will with a little bit of grinding

Clb · Apr 14, 2020

There is a pn in the tech section with the facett (fail, read up first)pump swap on here...
hope you did some research on e pump models!

catbird7 · Apr 15, 2020

I think it's simply a big block Chevy block-off plate.

hesutton · Apr 16, 2020

Yes that will work. I've done this a few times and used the same block off plate for a BBC. Never needed any modifications. They should just bolt right in place of the mechanical lift pump.

Heath

SkipBurney · Apr 16, 2020

I used a BB Chevrolet plate and the casting flange on the block held it off so I had to grind mine just a little for it to clear

BrianX128 · Apr 16, 2020

There are for sure two parts numbers and the one will leak some if you don't grind a small part off. I've had both, they are listed on here somewhere but I can't find it. It's an easy fix if you get the wrong one though, just let the truck idle for 5 minutes and find out before you go driving.

mblaney · Apr 17, 2020

I made my own (too lazy to go to the store and buy one

). Just buy one and match it up with the profile of your old fuel pump. Grind away if needed.

LowTech · Apr 17, 2020

Would love to get one that doesn't require grinding as ac power is not a thing where I'm camped.

Sent from my Z6201V using Tapatalk

Scotty4 · Apr 17, 2020

LowTech said:
Would love to get one that doesn't require grinding as ac power is not a thing where I'm camped.

Sent from my Z6201V using Tapatalk

File and sand paper?

typ4 · Apr 18, 2020

You guys know that there are 2 fuel pump mounting shapes, ours ,which is 99% of all american carbed vehicles.
Then a vertical one used on the Ford M series engines. And very few others.

https://www.googleadservices.com/pa...jayMC8l_LoAhVTHzQIHReFBcUQ9aACegQICxBD&adurl=

https://www.google.com/imgres?imgur...hUKEwi-0cbpl_LoAhULIzQIHSemD00QMygcegUIARDNAQ

LowTech · Apr 18, 2020

Scotty4 said:
File and sand paper?

May have a file somewhere.[emoji848]

Cubey · Apr 18, 2020

SkipBurney said:
It will with a little bit of grinding

Not this one.
https://www.spectreperformance.com/42473-fuel-pump-block-off-plate

It installed perfectly on my RV. The included bolts are right for an IDI block too.

Go read Crapazon reviews, others say the same thing: no grinding needed on IDIs.

You must be registered for see images attach

SKJUMP · Apr 20, 2020

454 Big Block Chevy is a direct bolt up. I have one on my 94 IDI.

Fuel Pump Block Off Plate

harrietnorth

Registered User

frankenwrench

overkill is under rated!

SkipBurney

Full Access Member

Clb

Another old truck

catbird7

Full Access Member

hesutton

The Anti-Anderson

SkipBurney

Full Access Member

BrianX128

Supporting Member

mblaney

Full Access Member

LowTech

Mech Wrangler

Scotty4

Supporting Member

typ4

Supporting Member

LowTech

Mech Wrangler

Cubey

Van dweller

SKJUMP

Registered User

Similar threads

Latest posts

Forum statistics

Staff online

Members online

Share this page